1.5 HP Elite TENV Electric Motor
1.5 HP Elite TENV Electric Motor
The 1.5 HP Elite TENV Electric Motor is a single-phase, dual-voltage boat lift motor. The motor is made to be mounted directly onto gearboxes, such as the A-Drive and E-Drive gearboxes, without needing a separate base. The motor comes with a painted housing,
This motor will work on BH-USA A-Drive, BH-USA E-Drive, Aqua Marine E-Drive and Golden Sea Drive. It comes with detailed wiring instructions compatible with Bremas and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. This motor is TENV and not IP rated, not suitable for use in salt water environments or exposed to the elements. This motor needs to be used inside a boat house or under a roof.
The motor has a horsepower of 1.5 and works with either 115 volts or 230 volts. It operates in a single phase with amperage ratings of 20 for 115 volts and 10 for 230 volts. Running at a speed of 1725 RPM with a frequency of 60 Hz, it fits a frame size of 56c and has a service factor of 1.00. The motor is categorized as Type C. It’s built to withstand an ambient temperature of up to 40°C and has a maximum operating time of 15 minutes. The motor is designed with a TENV (Totally Enclosed Non-Ventilated) housing, with insulation rated as class B. It’s recognized by UL (Underwriters Laboratories) with a cRUus stamp.
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 34.45 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 13.25 in. | Product Width: | 8.50 in. |
| Product Height: | 6.40 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 95819 | Retail SKU: | 93014 |
Nameplate Specifications |
|||
| HP: | 1.5 (1 1/2) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 20.0 (115v) /Â 10.0 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.0 |
| SFA: | NA | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | L |
| Insulation: | B | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | cRUus |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 8.50 in. | Mounting: | C56 face mount |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Rolled Steel | Replacement Capacitor: | 650 uF |
| Capacitor SKU #: | BH02249 | Keystock: | Included |
| Keystock Length: | 1 5/16 in. | Keystock Width: | 3/16 in. |
Product Overview
- 1.5 HP for efficient and powerful boating
- Dual-voltage: 115v/230v for versatile usage
- Sleek black finish enhances aesthetics
- Direct drive pattern for various boating systems
- Robust construction with rolled steel
- TENV housing for superior environmental protection
- UL/CSA listed for utmost safety assurance
- 15-minute runtime aligns with optimal usage
- Convenient setup with colored T-wires
- Reliable performance with aluminum end bells
