1 HP Heavy Duty Elite TENV Bremas Wired Motor with Base
1 HP Heavy Duty Elite TENV Bremas Wired Motor with Base
The 1 HP Heavy Duty Elite TENV Bremas Wired Motor with Base is a single-phase, dual-voltage (115v/230v) boat lift motor. The motor has a painted coating on the housing. The welded base of the motor is compatible with standard mounting patterns found on flat-plate gear plates, which are commonly used in boat hoists to lift and lower boats.
This motor is engineered to seamlessly integrate with a range of flat-plate hoists from reputable brands like Boat Hoist USA, ACE Labs, American Power Hoist, AMS, and Hefty Hoist. It comes with detailed wiring instructions compatible with Breams and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. Furthermore, this motor is equivalent to the Leeson boat hoist motor #6439191252, providing comparable performance and reliability.
You can choose between a Bremas maintained (lock-on) or momentary (spring-loaded) boat lift switch. Both switches are connected with 14/5 SJTW control cable, with the in-line GFCI located 4 1/2 inches away from the plug. The type of plug and GFCI wired to the wiring harness depends on your motor voltage selection.
This heavy-duty motor has a power of 1 horsepower (HP) and can operate on either 115 volts or 230 volts. When running on 115 volts, it draws 13.0 amps, and on 230 volts, it draws 6.5 amps. It spins at a speed of 1725 revolutions per minute (RPM) with a frequency of 60 Hz. It fits into frame 56 and has a service factor of 1.25. It can handle up to 15.7 amps at 115 volts or 7.7 amps at 230 volts. It’s built to withstand temperatures up to 40°C for a maximum of 15 minutes. The housing is Totally Enclosed Non-Ventilated (TENV) with a code of L. It has insulation class B and is recognized by UL with a C-UL-US stamp.
Totally Enclosed Non-Ventilated (TENV)
A Totally Enclosed Non-Ventilated motor is a type of electric motor that is enclosed to prevent the ingress of foreign particles (dust, moisture, etc.) but does not have external ventilation openings for air circulation. Unlike some other motor types, TENV motors do not rely on external airflow for cooling and are designed to operate in a sealed environment.
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 29.75 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 12.50 in. | Product Width: | 6.75 in. |
| Product Height: | 9.50 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93046 | Retail SKU: | 93068 |
Nameplate Specifications |
|||
| HP: | 1 (Heavy Duty) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 13.0 (115v) / 6.5 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56 | Service Factor: | 1.25 |
| SFA: | 15.7 (115v) / 7.7 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | L |
| Insulation: | B | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 18.75 in. | Mounting: | Resilient Base – Extended Studs |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Rolled Steel | Replacement Capacitor: | 480 uF |
| Capacitor SKU #: | BH02248 | Keystock: | Included |
| Keystock Length: | 1 5/16 in. | Keystock Width: | 3/16 in. |
Boat Lift Switch Specifications |
|||
Maintained |
Momentary |
||
| Model #: | CA0200034I-B96IQ6R | Model #: | CA0200037I-B96IQ6R |
| Retail SKU #: | BH09014 | Retail SKU #: | BH09015 |
| Weight: | 1.25 lbs. | Weight: | 1.25 lbs. |
| Box Color: | Light Grey | Box Color: | Light Grey |
| Housing Length: | 4.5 in. | Housing Length: | 4.5 in. |
| Housing Width: | 3.5 in. | Housing Width: | 3.5 in. |
| Housing Height: | 4.5 in. | Housing Height: | 4.5 in. |
| Handle Color: | Red | Handle Color: | Red |
| Handle Length: | 3.0 in. | Handle Length: | 3.0 in. |
| Handle Width: | 1.1875 in. | Handle Width: | 1.1875 in. |
| Handle Height: | 1.3125 in. | Handle Height: | 1.3125 in. |
| Country of Origin: | Italy | Country of Origin: | Italy |
Technical Specifications |
|||
Maintained |
Momentary |
||
| Amps: | 20 | Amps: | 20 |
| VAC | 600 | VAC | 600 |
| Torque: | Tight | Torque: | Tight |
| Certification: | EN 60947-3 | Certification: | EN 60947-3 |
| Certification: | CE | Certification: | CE |
| Certification: | C-UL-US Listed | Certification: | C-UL-US Listed |
GFCI Wire Harness Specifications |
|||
110v |
220v |
||
| Manufacturer: | Southwire Company | Manufacturer: | Southwire Company |
| Plug Type: | 3-US 110 V Standard | Plug Type: | US 240 Volt NEMA 6-15 |
| VAC: | 125 | VAC: | 240 |
| Hz: | 60 | Hz: | 50/60 |
| Amps: | 15 | Amps: | 15 |
| Watts: | 1875 | Watts: | 3600 |
| Type: | Rainproof Class A | Type: | Rainproof Class A |
| GFCI Type: | In-line | GFCI Type: | In-line |
| Cable Type: | 14/5 SJTW | Cable Type: | 14/5 SJTW |
| GFCI to Plug: | 4.5 in. | GFCI to Plug: | 4.5 in. |
| Cord Diameter Range: | 0.28 – 0.65 in. | Cord Diameter Range: | 0.28 – 0.65 in. |
| Country of Origin: | Honduras | Country of Origin: | Honduras |
| UL: | Listed | UL: | Listed |
| CSA: | Certified | CSA: | Certified |
| Reset Button: | Yes | Reset Button: | Yes |
| Reset Type: | Automatic | Reset Type: | Automatic |
| BH-USA SKU: | 12211 | BH-USA SKU: | 12228 |
| Catalog #: | 303385214 | Catalog #: | 25090 |
