3,000 lb. A-Drive Boat Hoist

0 Reviews
Composit Price

3,000 lb. A-Drive Boat Hoist

This 3,000 lb. A-Drive Boat Hoist comes with an Elite 3/4 HP stainless C-Face wired boat lift motor and an A-Drive 40:75 double worm reducer gearbox. The gearbox housing is made of solid aluminum with a marine-grade finish. It has a 3,000-lb straight-line capacity. Gear ratio: 450:1. Factory lubricated with a special blend of gear oil. Seals can be replaced. The gears do not freewheel. We have partnered with one of the biggest worm gear reducer manufacturers in the world. Easy installation with optional hoist mounts The motor is equipped with an in-line GFCI, wired for 110v or 220v, and 16 ft. of control cable.

The A-Drive 40:75 Double Worm Reducer Gearbox is a direct-drive gearbox designed with a double worm gear reducer. Featured on the 3,000 lb and 4,000 lb enclosed boat hoists of the A-Drive series. The 3,000 lb A-Drive boat hoist is powered by a 3/4 HP wired motor. The 4,000 lb A-Drive boat hoist is powered by a 1 HP wired motor.

The gearbox housing is made of solid aluminum with a marine-grade finish. The gearbox ratio is 450:1. This gearbox includes bronze-on-steel gears. The enclosed gears are permanently lubricated with BH-USA gear grease. No leaks are guaranteed. Includes cast flange mount for the output shaft. Stainless steel fasteners are used.

This gearbox works on both overhead boat lifts and pile mount boat lifts, provided that the appropriate mounting plate is used. Attaching the direct drive boat hoist to the boat lift drive pipe requires a hardened output driveshaft.

The Elite 3/4 HP Painted C-Face Wired Boat Lift Motor is a single-phase, dual voltage motor. Painted black finish. Includes start capacitor. Direct drive mounting pattern. Compatible with our A-Drive direct drive boat hoists.

Compatible with BH-USA A-Drive Direct Drive Systems, Golden Sea Drives, and other direct-drive systems. Aluminum end bells included. Double shielded ball bearings. Dynamically balanced rotor.

NEMA 56C enclosure with IP-55 protection. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing keeps dirt, insects, and water out.

Max runtime is 15 minutes. Finished in black. Includes colored T-wires. Comes with easy-to-follow instructions. Includes BH-USA’s equipment guide and wiring instructions.

A motor wire harness is installed directly on the electrical motor. Depending on your preference, you can select a maintained (lock-on) or momentary (spring-loaded) drum switch type. The in-line GFCI has a built-in test and reset button.

3,000 lb. A-Drive Boat Hoist

It is BH-USA’s recommendation to hire a licensed electrician for wiring or rewiring electrical components. Return policy.

3,000 lbs. 4,000 lbs. 7,000 lbs.
Gear Type: 40:75 40:75 40:75 40:90
HP: 3/4 1 1 1 1/2
Finish: Stainless Steel Painted Stainless Steel Stainless Steel
Output Torque: 3.699 in./lbs. 4.943 in./lbs. 4.943 in./lbs.  7.399 in./lbs.
 Motor Frame: C-Face C-Face C-Face C-Face

Gearbox Type: Double Worm Reduction
Box Type: Fully enclosed
Gear Type: 40:75
Actual Ratio: 450:1
Output Shaft: 1 1/4 in.
Input Motor Shaft: 5/8 in.
Motor Shaft to Pipe Shaft: 6.59 in.
Pipe Mount Bolt Size: (4) 1/2 in.
Overall Dimensions:  11.16″ x 7.21″ x 13.23″
Motor Flange Size:  4.78″ x 3.94″ x 3.37″
Pipe Flange Size: 8.07″ x 5.04″ x 6.77″
Motor Mount Type: NEMA 56C
Motor Mount Bolt Size: (4) 3/8 in.
Motor Mount Hole-to-Bolt Mount: 4.15 in.
3/4 HP Output Torque: 3.699 in./lbs.
1 HP Output Torque:  4.943 in./lbs.
Case Material: Cast aluminum
Lube Type: Specialty-blended grease
Lube: Maintenance-free
Warranty: 5 years
Brand: Elite Motors
Horsepower: 3/4
Frame: 56C
RPM: 1725
SF: 1.15
Voltage: 115v / 230v
Phase: 1
Amps: 11.2 (115v) / 5.6 (230v)
SFA 12.4 (115v) / 6.2 (220v)
Herz: 60
AMB: 40°c
Code: H
Insulation: F
Max. Run Time: 15 min.
Finish: Painted
Shaft Dua: 5/8 in.
Electric Motor Wire Harness
110v Plug: 3-US 110v Standard
220v Plug: US 240v NEMA 6-15
Switch Size: 3.5″ x 4.5″ x 4.5″
Max. Amps: 20
Max. HP: 1 1/2
Compliance: UL, NEMA, CE, SA
VAC: 120-240
Box Color: Gray
Material: Plastic
Handle: Red
Type: Maintained / Momentary
Cable: 14/5 SJTW
GFCI-to-Plug: 4 1/2 in.
Box-to-GFCI: 60 in.
Class: A-Rainproof
Amp: 15
Hz: 60
Voltage: 125v / 240v
Reset: Automatic
Cord Dia.: .28 – .65
Motor Pulley
Size: 2 in. x 2 in. x 2 in.
Material: Aluminum
Bore Size: 5/8 in. (.630 in.)
Type: Center bore
Set Screw: 3/8 in.
Thread: 16 (coarse)
Build: Machined
Fits: Single
Mount: 56-Frame

Product Overview

  • Features the 40:75 double worm reducer gearbox
  • Includes 3/4 HP stainless steel electric motor
  • 3,000 lbs. straight-line capacity
  • Enclosed and specially-blended lubrication
  • Made from solid aluminum
  • Features all stainless steel mounting fasteners