480uF Start Capacitor for 1 HP HD Painted Clawfoot & 1 1/2 HP Painted C-Face Motors
The 480uF Start Capacitor fits the Elite 1 HP Heavy Duty 56 Frame Boat Lift Motor & Elite 1 1/2 HP Direct Drive Boat Lift Motor. 480 /- 20% uF capacitor that mounts into the housing of the boat lift motor. The capacitor is located in the housing on the side of the motor. Briefly increases motor start torque. In boat lifts when the motor is a little sluggish at the start or just hums, it is a typical indicator that the start capacitor should be replaced. Easy as replacing a battery. No motor entry is required. Works with Marathon, GE, A.O. Smith, and Leeson motors.
Start capacitor power measured by units of capacitance, labeled in microfarads (uF). This is the ability of a body to store an electrical charge; the smaller the number the less the charge. Most known C-Face, single phase, 3/4 HP boat lift motors use start capacitors with a uF capacitance as low as 600.
|Microfarads (uf):||480 UF|
|OEM:||Elite Painted 1 HP|
|Universal:||Marathon, AO Smith, Leeson, & Most 1 1/2 HP electric motors|
|Cap Dimensions:||3.4 in. L x 1 3/4 in.|
OEM (Original Equipment Manufacturer) is stated that this capacitor is the factory capacitor for the Elite Brand Motors and can be used as a universal capacitor for other brand motors. BH-USA has tested this capacitor for the listed brands to be used as a universal capacitor, however, you will still need to measure the inside of the housing to insure that this start capacitor will fit. This capacitor could differ in size, color, and markings from the capacitor on your existing motor. Take caution when working with any electrical component and ensure that the motor is un-plugged before attempting to change the capacitor. A start capacitor can still have the ability to shock you even when the motor is unplugged. BH-USA always recommends you hire a licensed electrician for any work done on electric motors.
- Fits most 1/2 HP electric motors
- 480 uF capacitor
- Fits 1 HP HD Painted Clawfoot & 1 1/2 HP Painted C-Face Motors
- Easy as replacing a battery
- No motor entry required
- Works with Marathon, GE, A.O. Smith, and Leeson motors