Aluminum Pile Mount Top Beam Bracket
Aluminum Pile Mount Top Beam Bracket
The Aluminum Pile Mount Top Beam Bracket is a safety securement bracket for aluminum pile mount boat lifts. The bracket slides onto the bottom flange of the aluminum top beam. The top beam rests on the top of the dock piling. The bracket installs on the dock piling as an added securement bracket. The bracket helps keep the top beam from moving side to side or being lifted during bad weather. Features a no-weld design. Uses stainless steel fasteners with PVC isolators so the aluminum bracket does not touch the dock piling wood. Available in (3) sizes for different size pile mount boat lifts. Secures top beams up to 7 in. channel. The bracket pieces mounting on the aluminum top beam are adjustable making it easier to install. Made from 6061-T6 US aluminum.
Dock piling mounting fasteners not included.
The hex head bolts, flat washers, and nylock nuts factory installed. It holds the mounting bracket piece and the aluminum flange piece together. The rod and cap nuts are used on the adjustable brackets to secure to the bottom flange of the aluminum top beam. These will need tightening when installing the mounting bracket.
Specifications
| Capacity (per bracket): | 4,000 lbs. | 5,000 lbs. | 10,000 lbs. |
| Fits: | 6K – 8K lifts | 9K – 10K lifts | 12K – 20K lifts |
| Lift Type: | Pile mount | Pile mount | Pile mount |
| Material: | Aluminum | Aluminum | Aluminum |
| Material Type: | 6061-T6 US | 6061-T6 US | 6061-T6 US |
| Channel Size: | 5 in. | 6 in. | 7 in. |
| Mounting Holes: | 2 | 2 | 2 |
| Mounting Hole Size: | 5/8 in. | 5/8 in. | 5/8 in. |
| Mounting Hole Placement: | Center | Center | Center |
| Clamp Spread: | 7 3/4 in. | 8 1/4 in. | 10 1/4 in. |
| Protection: | PVC isolators | PVC isolators | PVC isolators |
| Nylock Nut Material: | Stainless steel | Stainless steel | Stainless steel |
| Nylock Nuts: | 2 | 2 | 2 |
| Nylock Size: | 3/8 in. | 3/8 in. | 3/8 in. |
| Nylock Nut Thread Count: | 16 NC | 16 NC | 16 NC |
| Hex Head Bolt Material: | Stainless steel | Stainless steel | Stainless steel |
| Hex Head Bolts: | 2 | 2 | 2 |
| Hex Head Bolt Size: | 3/8 in. x 1 in. | 3/8 in. x 1 in. | 3/8 in. x 1 in. |
| Flat Washer Material: | Stainless steel | Stainless steel | Stainless steel |
| Flat Washers: | 2 | 2 | 2 |
| Flat Washer Size: | 3/8 in. | 3/8 in. | 3/8 in. |
| Cap Nut Material: | Stainless steel | Stainless steel | Stainless steel |
| Cap Nuts: | 2 | 2 | 2 |
| Cap Nut Size: | 1/2 in. | 1/2 in. | 1/2 in. |
| Rod Material: | Stainless steel | Stainless steel | Stainless steel |
| Rods: | 1 | 1 | 1 |
| Rod Size: | 1/2 in. x 10 in. | 1/2 in. x 10 1/2 in. | 1/2 in. x 12 1/2 in. |
| Rod Thread: | 1 in. | 1 in. | 1 in. |
| Rod Thread Location: | Both ends | Both ends | Both ends |
The hex head bolts, flat washers, and nylock nuts factory installed. It holds the mounting bracket piece and the aluminum flange piece together. The rod and cap nuts used on the adjustable brackets to secure to the bottom flange of the aluminum top beam. These will need tightening when installing the mounting bracket.
Product Overview
- Slides on the bottom flange of aluminum top beams
- Mounts to the side of the dock piling
- Helps prevent side-to-side movement due to weather
- Made from 6061-T6 US aluminum
- Can be mounted on inside or outside of the dock piling
