BH-65 - 6,500 lb. Deluxe Flat-Plate Boat Hoist

Composite Price

BH-65 – 6,500 lb. Deluxe Flat-Plate Boat Hoist

SHIPS IN 2 BOXES

The BH-65 – 6,500 lb. Deluxe Flat-Plate Boat Hoist is made up of an Elite 1 HP painted electric motor with base and a 6,500 lb deluxe gear plate assembly. The 1 HP Heavy Duty Elite Boat Hoist Duty Motor with Base is a single phase, dual-voltage motors. It comes from the factory wired at 220v, but a licensed electrician can convert the wiring to make it a 110v electric motor. The motor is built from rolled steel. The NEMA 56 shaft is 0.625 inch thick and 1.88 inch extruding from the motor housing. UL Recognized (C-UL-US). It uses a capacitor to start.

TENV (totally enclosed, non-ventilated) housing. TENV housing prevents dirt, insects, and water from entering the motor. 15 minutes maximum runtime. Includes 1 inch long x 1/4 inch wide keystock, colored T-wires, easy-to-follow wiring instructions, BH-USA equipment guide, and wiring instructions. Depending on your preference, you can select a maintained (lock-on) or momentary (spring-loaded) drum switch type. The in-line GFCI has a built-in test and reset button.

The Extended Block Worm Assembly has a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. Attaches directly to the gear plate. The assembly has standard flat-plate mounting holes. The assembly is fitted with standard flat-plate mounting holes Factory assembled. Blocks are fitted with flange bushings. They have 1/4-inch grease fittings, which can be accessed easily.

The 6,500 lb. Deluxe Gear Plate Assembly includes the 10-inch aluminum die-cast hoist pulley, 96-tooth cast iron worm gear assembly, extended block bronze worm assembly and 34-inch drive belt. There are no steel-on-steel moving parts. It has been assembled and tested by the manufacturer. The 10 in. Aluminum Die-Cast Hoist Pulley is made from an aluminum die-casting process. Over 15 years of use on BH-USA Flat Plate hoists. They are much stronger in marine environments. They will not swell or bend. The belt-gripping technology on the inside of the pulley prevents belt slippage. Compatible with any known flat-plate hoist. Resistant to warping. Designed to fit drive belts better. The bore is 3/4 inches. Accepts belts up to 1/2 inch.

The AX-34 is a 34-inch drive belt that is compatible with all flat-plate boat hoists from BH-USA. This belt is the perfect length to fit around a 10-inch hoist pulley and to be able to attach it to a 2-inch motor pulley. As the motor’s driveshaft turns, the pulleys turn the belt in order to complete the movement of the hoist.

Deluxe Series feature cast iron 96-tooth worm gear assembiles with extended block bronze worm assemblies and up to 1 HP motors.

MAINTAINED (LOCK-ON) VS. MOMENTARY (SPRING)

Maintained (Lock-On) is a cam rotary switch that stays in place when you turn the handle to either the up or down position. It will continue to move until the handle is moved back to its resting position.

Momentary (spring) must be held in place. Once the handle is released it “springs” back into the rest position.

You are able to distinguish between the two cam rotary switches by the markings on the box. If there are arrows between the positions, it is a momentary switch. If there are no arrows, then it is a maintained switch.

You should never use the same materials (steel-on-steel or bronze-on-bronze) on flat-plate hoists.
When wiring or rewiring electrical components, BH-USA recommends hiring a licensed electrician.
Specifications

General Specifications

Rated Capacity: 6,500 lbs. Test Type: Straight-Line
Dimensions: 2 ft. x 1 ft. Thickness: 0.25 in. – 0.50 in.
Bull Gear Ratio: 96:1 GPA Warranty: Lifetime
Motor Size: 1 HP (Heavy Duty) Gear Plate Size: 6,500 lbs.

Block Worm Specifications

Worm Material: Bronze Thread: Single
Worm Diameter: 1.75 in. Thread Direction: Right Hand
Worm Bore: 0.754 in. Grease Fittings: 3
Worm Length: 2 in. Grease Fitting Size: 0.25 in. (1/4 in.)
Collars Included: 2 Collar Set Screw Size: 0.3125 in. (5/16 in.)
Block Type: Extended Driveshaft Material: Stress-proof Steel

Worm Gear Assembly Specifications

Material: Cast Iron Gear Bore: 2.875 in.
Diameter: 12.75 in. Hub Depth: 2 in.

Puley & Belt Specifications

Material: Aluminum Type: Die-Cast
Holds: 1 Belt Pulley Size: 10 in.
Pulley Bore: 0.75 in. Belt Size: 34 in.
Type: Cogged Hoist Pulley Fits: 10 in.
Belt Color: Black Motor Pulley Fits: 2 in.

Motor Specifications

Weight: 29.75 lbs. Individual Box Size: 15 in. x 10 in. x 10 in.
Product Length: 12.50 in. Product Width: 6.75 in.
Product Height: 9.50 in. Shaft Width: 0.625 in.
Shaft Length: 2 in. Country of Origin: China
Model #: 93046 Retail SKU: 93068
HP: 1 (Heavy Duty) Voltage: Dual (115v / 230v)
Phase: 1 Amps: 13.0 (115v) / 6.5 (230v)
RPM: 1725 Hz: 60
Frame: 56 Service Factor: 1.25
SFA: 15.7 (115v) / 7.7 (230v) Type: C
AMB: 40°c Time: 15 MIN
HSG: TENV Code: L
Insulation: B Thermally Protected: None
UL: Recognized UL Stamp: C-UL-US
Electrical Type: Capcitor Start Rotation: Selective
Shaft Type: NEMA 56 Shaft Extension: 1.88 in.
Frame Length: 8.75 in. Mounting: Resilient Base – Extended Studs
Drive End Bearing: Ball Opp Drive End Bearing: Ball
Frame Material: Rolled Steel Replacement Capacitor: 480 uF
Capacitor SKU #: BH02248 Keystock: Included
Keystock Length: 1 in. Keystock Width: 0.25 in.

Boat Lift Switch Specifications

Maintained

Momentary

Model #: CA0200034I-B96IQ6R Model #: CA0200037I-B96IQ6R
Retail SKU #: BH09014 Retail SKU #: BH09015
Weight: 1.25 lbs. Weight: 1.25 lbs.
Box Color: Light Grey Box Color: Light Grey
Housing Length: 4.5 in. Housing Length: 4.5 in.
Housing Width: 3.5 in. Housing Width: 3.5 in.
Housing Height: 4.5 in. Housing Height: 4.5 in.
Handle Color: Red Handle Color: Red
Handle Length: 3.0 in. Handle Length: 3.0 in.
Handle Width: 1.1875 in. Handle Width: 1.1875 in.
Handle Height: 1.3125 in. Handle Height: 1.3125 in.
Country of Origin: Italy Country of Origin: Italy
Amps: 20 Amps: 20
VAC 600 VAC 600
Torque: Tight Torque: Tight
Certification: EN 60947-3 Certification: EN 60947-3
Certification: CE Certification: CE
Certification: C-UL-US Listed Certification: C-UL-US Listed

Cam Diagram

230v 400v 690v
AC3-kW(A) 1 ph 3.7(12)
AC3-kW(A) 3 ph 4(13) 7.5(14) 7.6(8)
AC-23-kW(A) 1 ph 3(17)
AC-23-kW(A) 3 ph 6.5(17) 9(9) 9(9)

VAC Diagram

HP/V 1 ph 3 ph
120 1.6   —
200  — 5
240 3 7.5
480  — 10
600  — 10

GFCI Wire Harness Specifications

110v 220v
Manufacturer: Southwire Company Manufacturer: Southwire Company
Plug Type: 3-US 110 V Standard Plug Type: US 240 Volt NEMA 6-15
VAC: 125 VAC: 240
Hz: 60 Hz: 50/60
Amps: 15 Amps: 15
Watts: 1875 Watts: 3600
Type: Rainproof Class A Type: Rainproof Class A
GFCI Type: In-line GFCI Type: In-line
Cable Type: 14/5 SJTW Cable Type: 14/5 SJTW
GFCI to Plug: 4.5 in. GFCI to Plug: 4.5 in.
Cord Diameter Range: 0.28 – 0.65 in. Cord Diameter Range: 0.28 – 0.65 in.
Country of Origin: Honduras Country of Origin: Honduras
UL: Listed UL: Listed
CSA: Certified CSA: Certified
Reset Button: Yes Reset Button: Yes
Reset Type: Automatic Reset Type: Automatic
BH-USA SKU: 12211 BH-USA SKU: 12228
Catalog #: 303385214 Catalog #: 25090

Product Overview

  • 6,500 lb. Lift Rating
  • Deluxe series includes 6500 lb. gear plate and 1 heavy-duty hp motor
  • Factory assembled and tested under load
  • No steel-on-steel moving hoist parts
  • Meets UL and NEMA requirements
  • 2 in. motor pulley and 10 in. hoist pulley included
  • Ships in (2) boxes