Coastal Series Overhead V-Hull Boat Lift
Coastal Series Overhead V-Hull Boat Lift
The Coastal Series Overhead V-Hull Boat Lift is designed to be installed in boathouses. Features a side-mounted drive pipe and boat hoist. Features all marine-grade 6061-T6 US aluminum construction. Includes the A-Drive series direct-drive boat hoist system. All moving parts have grease fittings. Boat hoist lift capacity varies from the 4,000 lb. and 8,000 lb. configurations. No-weld design. A fully adjustable design. Allows the top beams and cradle beams to be field cut for any size boathouse. Includes stainless steel fasteners. Complete boathouse-style boat lift ready to install.
Includes a dual voltage, standard duty single-phase electric motor with a start capacitor. Stainless steel finish. Features the standard direct drive mounting hole pattern. Includes aluminum end bells. Double-shielded ball bearings. Dynamically balanced rotors. 5/8 in. motor shaft.
Includes
(1) A-Drive boat hoist (Double worm reducer gearbox & c-face motor)
(2) 12 1/2 ft. aluminum cradle beams
(2) 12 1/2 ft. aluminum top beams
(2) 12 ft. L x 10 in. H Aluminum bunks
(4) Guidepost stanchions
(1) Swaged loop 7 x 19 aircraft cable w/ fasteners
(4) Black guidepost bumpers
(1) Aluminum bunk mounting kit
(2) 2 3/8 in. OD / 2 in. ID boathouse style cable winders
(1) Aluminum dual-pipe support
(1) 2 3/8 in. OD / 2 in. ID boat lift drive pipe
Specifications
| Lift Capacity: | 4,000 lbs. | 8,000 lbs. |
| SKU #: | 15005 | 15000 |
| Top Beam Length: | 12 1/2 ft. | 12 1/2 ft. |
| Top Beam Web: | 6 in. | 6 in. |
| Top Beam Flange: | 4 in. | 4 in. |
| Web Thickness: | .210 in. | .210 in. |
| Flange Thickness: | .350 in. | .350 in. |
| Beam Wt/Lin ft.: | 4.7 lbs. | 4.7 lbs. |
| Top Beam Material: | 6061-T6 US aluminum | 6061-T6 US aluminum |
| Material Type: | Extruded | Extruded |
| Drive Pipe Size: | 2 3/8 in. OD / 2 in. ID | 2 3/8 in. OD / 2 in. ID |
| Drive Pipe Length: | 13 ft. | 13 ft. |
| Drive Pipe Finish: | Electro-galvanized | Electro-galvanized |
| Cable Type: | 7 x 19 aircraft cable | 7 x 19 aircraft cable |
| Cable Thickness: | 1/4 in. | 5/16 in. |
| Cable Length: | 60 ft. | 100 ft. |
| Cable Material: | Stainless steel | Stainless steel |
| Cable Configuration: | 1 part single | 2 part compounded |
| Cradle Beams Matierlal: | 6061-T6 US aluminum | 6061-T6 US aluminum |
| Cradle Beam Dimensions: | 12 1/2 ft. L x 6 in. Web x 4 in. Flange | 12 1/2 ft. L x 6 in. Web x 4 in. Flange |
| Cradle Beam Wt/Lin ft.: | 4.7 lbs. | 4.7 lbs. |
| Bunk Material: | Aluminum | Aluminum |
| Bunk Material Style: | 6061-T6 US | 6061-T6 US |
| Bunk Type: | Cradle | Cradle |
| Length: | 12 ft. | 12 ft. |
| Padding Material: | Rubber | Rubber |
| Padding Design: | Non-marking | Non-marking |
| Padding Color: | Black | Black |
| Bunk Height: | 10 in. (6 in. Flange) | 10 in. (6 in. Flange) |
| Bunk Angle: | 19 degrees | 19 degrees |
| 10 in. Cradle Bunk Weight: | 3,759 lbs. / linear ft. | 3,759 lbs. / linear ft. |
| Gearbox Type: | Direct drive | Direct drive |
| Gearbox Weight: | 28.35 lbs. | 38.3 lbs. |
| Warranty: | 5 years | 5 years |
| Gear Type: | 40:75 configuration | 40:90 configuration |
| Actual Ratio: | 450:1 | 450:1 |
| Material: | Aluminum | Aluminum |
| Lubrication: | Specially blended gear grease | Specially blended gear grease |
| Lubrication Application: | Permanently sealed in the gearbox | Permanently sealed in the gearbox |
| Motor Flange to Driveshaft Flange Offset: | 1.22 in. | 1.22 in. |
| Overall Dimensions: | 11.16 in. L x 7.21 in. W x 13.23 in. H | 11.16 in. L x 7.21 in. W x 13.23 in. H |
| Output Shaft Size: | 1 1/4 in. | 1 1/4 in. |
| Input Motor Shaft Size: | 5/8 in. | 5/8 in. |
| Motor Shaft to Drive Pipe Shaft: | 6.59 in. | 6.59 in. |
| Drive Pipe Mounting Bolt Size: | (4) .55 in. | (4) .55 in. |
| Drive Pipe Bolt Mount Hole to Bolt Mount Hole: | 4.59 in. | 4.59 in. |
| Driveshaft Gearbox Dimensions: | 8.07 in. L x 5.04 in. W x 6.77 H | 8.07 in. L x 5.04 in. W x 6.77 H |
| Motor Mounting Type: | C-Face | C-Face |
| Motor Mounting Bolt Size: | (4) 7/16 in. | (4) 7/16 in. |
| Motor Bolt Mount Hole to Bolt Mount Hole: | 4.15 in. | 4.15 in. |
| Motor Gearbox Dimensions: | 4.78 L x 3.94 in. W x 3.37 in. H | 4.78 L x 3.94 in. W x 3.37 in. H |
| 1 HP Motor A-Drive Output Torque: | 4,932 lbs./in. | X |
| 1 1/2 HP Motor A-Drive Output Torque: | X | 7,399 lbs./in. |
| Motor Brand: | Elite | Elite |
| Maximum Run Time: | 15 minutes | 15 minutes |
| Motor Dimensions: | 9 in. x 10 1/2 in. x 6 1/4 in. | 9 in. x 10 1/2 in. x 6 1/4 in. |
| Weight: | 29 lbs. | 39.65 lbs. |
| Horsepower: | 1 HP | 1 1/2 HP |
| Mounting Type: | C | C |
| RPM: | 1725 | 1725 |
| Service Factor: | 1.15 | 1.15 |
| SFA: | 17.5 (220v) | 8.8 (220v) |
| Phase: | 1 | 1 |
| Amps: | 15.6 (115v) | 7.7 (220v) |
| Herz: | 60 | 60 |
| AMB: | 40°C | 40°C |
| Frame: | 56C | 56C |
| HSG: | TENV | TENV |
| Code: | H | E |
| Insulation: | F | F |
| Shaft Diameter: | 5/8 in. | 5/8 in. |
| Drum Switch Dimensions: | 3 1/2 in. x 4 1/2 in. x 4 1/2 in. | 3 1/2 in. x 4 1/2 in. x 4 1/2 in. |
| Max Amps: | 20 | 20 |
| Max HP: | 1 1/2 HP | 1 1/2 HP |
| Compliance: | UL, NEMA, CE, SA | UL, NEMA, CE, SA |
| VAC: | 120 | 240 |
| Weight: | 1.2 lbs. | 1.2 lbs. |
| Box Color: | Gray | Gray |
| Handle Color: | Red | Red |
| Switch Type: | Maintained (Lock-On) | Maintained (Lock-On) |
| Housing Material: | Plastic | Plastic |
| Plug Type | 3-US 110 V Standard | US 240 Volt NEMA 6-15 |
| Control Cable Size: | 14/5 SJTW | 14/5 SJTW |
| Drum Switch Cable to GFCI Plug: | 60 in. | 60 in. |
| GFCI to Plug: | 4 1/2 in. | 4 1/2 in. |
| GFCI | 7 in. x 2 1/2 in. x 1 in. | 7 in. x 2 1/2 in. x 1 in. |
| Color | Black | Black |
| Class | A-Rainproof | A-Rainproof |
| Catalog Number | 303385214 | 25090 |
| AMP | 15 | 15 |
| Hz | 60 | 50/60 |
| Watt | 1875 | 3600 |
| Volt | 125 | 240 |
| Reset Type | Automatic | Automatic |
| Cord Diameter Range | .28 – .65 | .28 – .65 |
| Lift Speed: | Close to 4’/Min (Tested: 24″ in 31 Seconds) | Approx. 2’/Min (Tested: 24″ in 62 Seconds) |
| Guidepost Height: | 60 in. | 60 in. |
| Guidepost Bumper Size: | 48 in. | 48 in. |
| Guidepost Bumper Type: | Split | Split |
| Guidepost Bumper Color: | Black | Black |
| Shipping Type: | Freight | Freight |
| Packaging: | 13 1/2 ft. x 2 ft. x 2 ft. wood crate | 13 1/2 ft. x 2 ft. x 2 ft. wood crate |
All boat lifts come with 33 ft. cable drops for straight-line boat lifts. You will need to cut the cable to fit your configuration.
Each BH-USA boat lift is individually crated and shipped via motor freight. It is the purchaser’s responsibility to arrange for a delivery address that is accessible to the freight company and has a fork truck available for unloading. Customers will be required to unload crates by hand if fork trucks are not available. In order to facilitate the delivery, BH-USA will request a call from the freight company to the customer. Missed deliveries may incur extra freight charges that will be the buyers’ responsibility.
Product Guides
Product Overview
- All 6061-T6 US aluminum construction
- Swaged stainless steel 7 x 19 aircraft cable w/ fasteners
- Full boat lift ready to be installed
- A-Drive direct-drive belt-free boat hoist
- Aluminum black rubber on top of the aluminum bunks
- 4,000 lb. & 8,000 lb. styles
- No weld design, fully adjustable
- Made in the USA
