DLB1200A Plated Brake Winch
$ 93.45
UPC: 085077149340
SKU: DL14934
Return Policy
DLB1200A Plated Brake Winch
The DLB1200A Plated Brake Winch is for horizontal pulling and vertical lifting. 1,200 lb. load capacity. Self-locking winch. The winch includes a 7 in. handle with an ergonomic black handle grip. Built-in fully automatic friction brake. The fully automatic friction brake supplies constant, positive holding action when the handle is released. When cranking stops, the load stops preventing runaway loads. Made in the USA.
This winch requires a 50 lb. minimum operating load to function properly.
Specifications
| Product Dimensions: | 6 1/8 in. x 7 1/2 in. x 6 3/4 in. |
| Operating Load Required: | 50 lb [Min] |
| Drum Hub Diameter: | 2 1/2 in. |
| Gear Ratio: | 5/4:1 |
| Handle Length: | 7 in. |
| Mech. Adv.: | 27.8 [Max] |
| Maximum Drum Cap.: | 7/32 in. Cable x 69 ft. or 31 ft. Strap |
DLB vs. B-Series Brake Winch Comparison
| Feature | DLB- Series | B1200s | B1500s/ B2500s/ B3503 |
|---|---|---|---|
| Four models are available with an optional freewheel lever to put in freewheel mode | X | ||
| Accepts 2″ wide strap | X | ||
| Driveshaft gear teeth and reel gear teeth are induction hardened for increased strength | X | X | |
| All gear and shaft surfaces are case hardened for maximum strength | X | ||
| Larger 8 pitch gear teeth for increased strength | X | ||
| Largest 6 pitch gear teeth for maximum strength | X | ||
| Multiple drum hub diameter options for increased lifting and pulling speed | X | X | |
| Standard 12-1/4″ handle | X | X | |
| Braking mechanism protected by an external cover | X | X | |
| All drive gears protected by an external cover | X | ||
| Internal reel gears for more gear contact (reduces wear and increases strength) | X | ||
| Driveshaft needle bearings to reduce wear | X | ||
| Intended for a higher frequency and duration of use | X |
Product Guides
Product Overview
- Dutton-Lainson® brake winch for horizontal pulling and vertical lifting applications
- 1,200 lb. capacity
- 7 in. handle with ergonomic handle grip
- Built-in fully automatic friction brake holds load exactly in position when raising and lowering
- Zinc plated TUFFPLATE finish
- Made in the USA
- Requires a 50 lb. minimum operating load to function properly.
