Electra-Gear 3/4 HP Stainless Electric Motor
Electra-Gear’s 3/4 HP Painted Electric Motor is a single-phase, dual voltage motor with a start capacitor. The motor is factory-wired to run at 220 volts. A licensed electrician can rewire the motor to run at 110 volts. Compatible with all BH-USA flat-plate hoists and gear plates. Fits other brands that use the standard 4 ft x 2 ft flat-plate mounting holes.
The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor.
This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.
A clawfoot motor is a general-purpose motor. At BH-USA, these are used with flat-plate hoists. With clawfoot mounting slots, a standard flat-plate hoist can be easily mounted. By attaching a belt and pulley to the drive shaft, the motor can rotate the pulley. The belt will move as a result.
|Model #:||C6C17NK30 A|
|Max Run Time:||15 Minutes|
|Dimensions:||9 in. x 10 1/2 in. x 6 1/2 in.|
|Service Factor:||1.25 (110v) / 1 (220v)|
|Voltage:||115 / 230|
|Amps:||19.4 (110v) / 9.7 (220v)|
|SFA:||12.4 (110v) / 6.21 (220v)
|Frame:||56 (110) / C (220)|
- Clawfoot mounting design
- NEMA 56 electric motor
- UL Listed & CSA approved
- TENV – totally enclosed, non-venting
- Standard duty, dual voltage
- Single-phase motor with a start capacitor
- Stainless steel finish w/ matte aluminum end bells
- 15 min. maximum run time