The 1 HP Elite TENV Bremas Wired Motor is a powerful single-phase motor designed for boat lifts, featuring dual-voltage capability for versatile applications. Its sleek black finish enhances its aesthetic appeal while ensuring durability. The motor includes a start capacitor and boasts a direct drive mounting pattern, making it compatible with BH-USA A-Drive Direct Drive Systems, Golden Sea Drives, and other direct-drive systems.

Crafted with aluminum end bells and double shielded ball bearings, this motor guarantees reliable performance. The dynamically balanced rotor ensures smooth operation, while the NEMA 56C enclosure with IP-55 protection adds an extra layer of security. With UL/CSA listing and approval, this motor meets high safety standards.

The TENV (totally enclosed, non-ventilating) housing is a key feature, preventing dirt, insects, and water from entering the motor. This protective housing makes the motor suitable for various environmental conditions. The motor has a maximum runtime of 15 minutes, providing ample usage time for boat lift applications.

Installation is made easy with the inclusion of colored T-wires and comprehensive instructions. BH-USA’s equipment guide and wiring instructions further simplify the process. The motor wire harness is directly installed on the electrical motor, offering convenience and efficiency. Users can choose between a maintained (lock-on) or momentary (spring-loaded) drum switch based on their preference.

The in-line GFCI (Ground Fault Circuit Interrupter) features a built-in test and reset button for added safety and convenience during boat lift operations. The GFCI protects against electrical faults, ensuring a secure environment.

General Specifications

The motor weighs 25.10 lbs. and has dimensions of 10.50 inches (length) x 6.25 inches (width) x 8.0 inches (height). The shaft dimensions are 0.625 inches (width) x 2 inches (length). Manufactured in China, the motor has the model number 93008 and retail SKU 93059.

Nameplate Specifications

With a horsepower of 1 and dual voltages (115v / 230v), this motor operates in a single phase. It draws 12.57 amps (115v) / 6.29 amps (230v) and runs at 1725 RPM with a frequency of 60 Hz. The frame is 56c, with a service factor of 1.0. The SFA is not applicable, and the motor type is C. The ambient temperature is rated at 40°C, with a maximum runtime of 15 minutes. The housing type is TENV, coded as L. The insulation class is B, and it is not thermally protected. The motor is UL Recognized, with a UL stamp of cRUus.

Technical Specifications

The electrical type is Capacitor Start, with a selective rotation. The shaft type is NEMA 56, and the shaft extension measures 1.88 inches. The frame length is 8.50 inches, and it is mounted on a resilient base with extended studs. The drive end bearing, and opposite drive end bearing are both ball bearings. The frame material is rolled steel, and the replacement capacitor is 465 uF. The capacitor SKU is BH02247, and it comes with an included key stock measuring 1 inch in length and 0.25 inches in width.

Boat Lift Switch Specifications

For maintained operation, the model number is CA0200034I-B96IQ6R, with a retail SKU of BH09014. It weighs 1.25 lbs. and has a light grey box measuring 4.5 inches (length) x 3.5 inches (width) x 4.5 inches (height). The handle color is red, and the handle dimensions are 3.0 inches (length) x 1.1875 inches (width) x 1.3125 inches (height). The country of origin is Italy.

For momentary operation, the model number is CA0200037I-B96IQ6R, with a retail SKU of BH09015. It also weighs 1.25 lbs. and has the same box dimensions and handle specifications. The country of origin is Italy.

Technical Specifications for Switches

For both maintained and momentary switches, they draw 20 amps at 600 VAC, with tight torque. They are certified under EN 60947-3, CE, and are C-UL-US listed.

GFCI Wire Harness Specifications

For the 110v version, the manufacturer is Southwire Company, and it has a 3-US 110 V Standard plug type. It operates at 125 VAC, 60 Hz, drawing 15 amps and 1875 watts. The GFCI type is in-line, using a 14/5 SJTW cable. The GFCI to plug length is 4.5 inches, and the cord diameter range is 0.28 – 0.65 inches. The country of origin is Honduras, and it is UL listed and CSA certified. It features a reset button with automatic reset, and the BH-USA SKU is 12211, with a catalog number of 303385214.

For the 220v version, the manufacturer is Southwire Company, and it has a US 240 Volt NEMA 6-15 plug type. It operates at 240 VAC, 50/60 Hz, drawing 15 amps and 3600 watts. The other specifications are the same as the 110v version.

In summary, the 1 HP Elite TENV Bremas Wired Motor is a versatile and reliable motor designed for boat lifts, offering features that prioritize durability, safety, and ease of installation.