Elite 3/4 HP Painted C-Face Wired Boat Lift Motor
The Elite 3/4 HP Painted C-Face Wired Boat Lift Motor is a single-phase, dual voltage motor. Painted black finish. Includes start capacitor. Direct drive mounting pattern. Compatible with our A-Drive direct drive boat hoists.
Compatible with BH-USA A-Drive Direct Drive Systems, Golden Sea Drives, and other direct-drive systems. Aluminum end bells included. Double shielded ball bearings. Dynamically balanced rotor.
NEMA 56C enclosure with IP-55 protection. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing keeps dirt, insects, and water out.
Max runtime is 15 minutes. Finished in black. Includes colored T-wires. Comes with easy-to-follow instructions. Includes BH-USA’s equipment guide and wiring instructions.
A motor wire harness is installed directly on the electrical motor. Depending on your preference, you can select a maintained (lock-on) or momentary (spring-loaded) drum switch type. The in-line GFCI has a built-in test and reset button.
C-Face Style Motors
C-Face motors are a common mechanical standard in the United States. These motors have a rugged mounting flange. This flange supports the motor’s weight. Usually attached to a gearbox. Due to the strength of the flange, it is possible to cantilever the motor.
The NEMA C-Face mount consists of a machined-face flange and a pilot on the end of the shaft for direct coupling with equipment. There are threaded holes for mounting bolts on the motor’s mounting face.
It is BH-USA’s recommendation to hire a licensed electrician for wiring or rewiring electrical components. Return policy.
Specifications
Motor | |||
Brand: | Elite Motors | ||
Horsepower: | 3/4 | ||
Frame: | 56C | ||
RPM: | 1725 | ||
SF: | 1.25 | ||
Voltage: | 115v / 230v | ||
Phase: | 1 | ||
Amps: | 11.0 (115v) / 5.5 (230v) | ||
SFA | 12.5 (115v) / 6.2 (230v) | ||
Herz: | 60 | ||
AMB: | 40°c | ||
HSG: | TENV | ||
Code: | L | ||
Insulation: | B | ||
Max. Run Time: | 15 min. | ||
Finish: | Painted | ||
Shaft Dua: | 5/8 in. | ||
Electric Motor Wire Harness | |||
110v Plug: | 3-US 110v Standard | ||
220v Plug: | US 240v NEMA 6-15 | ||
Switch Size: | 3.5″ x 4.5″ x 4.5″ | ||
Max. Amps: | 20 | ||
Max. HP: | 1 1/2 | ||
Compliance: | UL, NEMA, CE, SA | ||
VAC: | 120-240 | ||
Box Color: | Gray | ||
Material: | Plastic | ||
Handle: | Red | ||
Type: | Maintained / Momentary | ||
Cable: | 14/5 SJTW | ||
GFCI-to-Plug: | 4 1/2 in. | ||
Box-to-GFCI: | 60 in. | ||
Class: | A-Rainproof | ||
Amp: | 15 | ||
Hz: | 60 | ||
Voltage: | 125v / 240v | ||
Reset: | Automatic | ||
Cord Dia.: | .28 – .65 | ||
Motor Pulley | |||
Size: | 2 in. x 2 in. x 2 in. | ||
Material: | Aluminum | ||
Bore Size: | 5/8 in. (.630 in.) | ||
Type: | Center bore | ||
Set Screw: | 3/8 in. | ||
Thread: | 16 (coarse) | ||
Build: | Machined | ||
Fits: | Single | ||
Mount: | 56-Frame |
Product Overview
- C-Face mounting design
- NEMA 56C electric motor
- UL Listed & CSA approved
- TENV - totally enclosed, non-venting
- Standard duty, dual voltage
- Single-phase motor with a start capacitor
- Powder-coated black from the factory
- 15 min. maximum run time