Galvanized Dual Pipe Support L-Brackets
The Galvanized Dual Pipe Support L-Brackets are a replacement part for the Galvanized Dual Pipe Support for Wood Beams. The brackets use the preexisting slots on the dual pipe support to mount. Made from 1/4 in. hot-dipped galvanized steel. Features (3) machine-punched 5/8 in. mounting holes in a straight line going down the bracket. Accepts 1/2 in. fastener bolts. The bottom flange has a machine-punch 2 in. x 5/8 in. mounting slot. The side mount L-brackets have reinforced triangles welded to the L-bracket for added stability.
Mounting fasteners are not included.
Dual pipe supports, with or without hoist hanger, is best used in a center mount configuration. A 4,000 lb. maximum rating per hoist hanger when used correctly in center mounting. Side mounting greatly reducts the dual pipe support and hoist hanger capacity. A 1,000 lb. maximum rating when used correctly side mounted. See the attached guide for more information and limitations.
|L-Bracket Dimensions:||3 1/2 in. L x 2 1/2 in. W x 9 in. H|
|L-Bracket Finish:||Hot-dipped galvanized|
|Steel Thickness:||1/4 in.|
|Wood Beam Mounting Holes:||3|
|Wood Beam Mounting Hole Size:||5/8 in.|
|Mounting Fastener Size:||Accepts up to 1/2 in. thick|
|Drive Pipe Mounting Holes:||1|
|Drive Pipe Mounting Hole Type:||Slot|
|Mounting Slot Size:||2 in. x 5/8 in.|
|Side Mount Style:||Triangle renforcements|
|Center Mout Maximum Rating:||4,000 lbs.|
|Side Mount Maximum Rating:||1,000 lbs.|
|Side Mount Type:||Welded|
Center-mount pipe supports are only recommended for center mount or twin mount installations. It is not recommended to use pipe support on a side mount installation. Never attempt to straight-line lift any more than 4000 lbs on a side mount overhead lift or straight line more than 6000 lbs on center or twin mount lifts. Only use the full length of the pipe to connect both pipe supports.
Do not attempt to use two short pieces of the drive pipe. If designing or engineering your overhead lift, you must download and read the BH-USA overhead boat lift guide that can be found on this page. Also available in the tech guide section. BH-USA makes available complete engineered and rated lifts and highly encourages choosing this option over designing and engineering a boat lift on your own.
The above ratings of the dual pipe supports are only valid if installing or using the pipe supports with the BH-USA overhead boat lift guide. The Side Mount and Twin Mount ratings are based on straight line pull. Rating is based on per pipe support and not per boat lift. When considering the weight of your boat, you must use full wet weight plus the weight of the boat cradle. (wet weight + boat cradle weight = total lifting weight)
BH-USA engineers and manufactures factory-rated complete boat lifts. We highly recommend purchasing one of these boat lifts instead of building your own. If you, or your installer, buys parts and pieces to engineer your custom boat lift, it will no longer be considered a Boat Hoist USA engineered boat lift.
- Wood beam mounts
- Side or Center mount styles
- 1/4 in. hot-dipped galvanized steel
- Side mount incorporates welded triangle side supports
- Replacement mounting bracket for galvanized dual-pipe supports
- Features 5/8 in. mounting holes & 2 in. x 5/8 in. mounting slot
- Accepts up to 1/2 in. mounting fasteners
- Mounting fasteners not included