Leeson 1 1/2 HP Painted Electric Motor
Leeson’s 1 1/2 HP Painted Electric Motor is a single-phase, dual voltage motor with a start capacitor. The motor is factory-wired to run at 220 volts. A licensed electrician can rewire the motor to run at 110 volts. Compatible with all BH-USA flat-plate hoists and gear plates. Fits other brands that use the standard 4 ft x 2 ft flat-plate mounting holes.
The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor.
This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.
A clawfoot motor is a general-purpose motor. At BH-USA, these are used with flat-plate hoists. With clawfoot mounting slots, a standard flat-plate hoist can be easily mounted. By attaching a belt and pulley to the drive shaft, the motor can rotate the pulley. The belt will move as a result.
|Output HP:||1 1/2 HP|
|Output KW:||1.1 kW|
|Design Code:||NO DESIGN CODE|
|Enclosure:||Totally Enclosed Non-Ventilated|
|Ambient Temperature:||40 °C|
|Drive End Bearing Size:||6203|
|Opp Drive End Bearing Size:||6203|
|Number of Speeds:||1|
|Electrical Type:||Capacitor Start Induction Run|
|Starting Method:||Across The Line|
|Drive End Bearing:||Ball|
|Opp Drive End Bearing:||Ball|
|Frame Material||Rolled Steel|
|Shaft Type:||NEMA 56|
|Assembly/Box Mounting:||F1 OUT ODE BRKT RADIAL|