Leeson 1 HP Painted Electric Motor
Only 8 left in stock
Leeson 1 HP Painted Electric Motor
Leeson’s 1 HP Painted Electric Motor is a single-phase, dual voltage motor with a start capacitor. The motor is factory-wired to run at 220 volts. A licensed electrician can rewire the motor to run at 110 volts. Compatible with all BH-USA flat-plate hoists and gear plates. Fits other brands that use the standard 4 ft x 2 ft flat-plate mounting holes. The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor. This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.
Clawfoot Motors
A clawfoot motor is a general-purpose motor. At BH-USA, these are used with flat-plate hoists. With clawfoot mounting slots, a standard flat-plate hoist can be easily mounted. By attaching a belt and pulley to the drive shaft, the motor can rotate the pulley. The belt will move as a result.
Specifications
| Nameplate Specifications | |
| Output HP: | 1 HP |
| Output KW: | 0.75 kW |
| Frequency: | 60 Hz |
| Voltage: | 115/208-230 V |
| Current: | 13.8/6.9-6.9 A |
| Speed: | 1725 rpm |
| Service Factor: | 1 |
| Phase: | 1 |
| Efficiency: | 69.4 % |
| Power Factor: | 67.4 |
| Duty: | 15 Minute |
| Insulation Class: | F |
| Design Code: | N |
| KVA Code: | J |
| Frame: | S56 |
| Enclosure: | Totally Enclosed Non Ventilated |
| Thermal Protection: | No |
| Ambient Temperature: | 40 °C |
| Drive End Bearing Size: | 6203 |
| Opp Drive End Bearing Size: | 6203 |
| UL: | Recognized |
| CSA: | Y |
| CE: | N |
| IP Code: | 43 |
| Number of Speeds: | 1 |
| Technical Specifications | |
| Electrical Type: | Capacitor Start Induction Run |
| Starting Method: | Across The Line |
| Poles: | 4 |
| Rotation: | Selective Counterclockwise |
| Resistance Main: | .496 Ohms |
| Mounting: | Rigid Base |
| Motor Orientation: | Horizontal |
| Drive End Bearing: | Ball |
| Opp Drive End Bearing: | Ball |
| Frame Material | Rolled Steel |
| Shaft Type: | T |
| Assembly/Box Mounting: | F1 ONLY |
Product Overview
- Clawfoot mounting design
- NEMA 56 frame electric motor
- UL Listed & CSA approved
- TENV - totally enclosed, non-venting
- Standard duty, dual voltage
- Single-phase motor with a start capacitor
- 15 min. maximum run time
