Leeson 3/4 HP Painted Electric Motor

0 Reviews
UPC: 013964212372
SKU: 12372



Leeson 3/4 HP Painted Electric Motor

Leeson’s 3/4 HP Painted Electric Motor is a single-phase, dual voltage motor with a start capacitor. The motor is factory-wired to run at 220 volts. A licensed electrician can rewire the motor to run at 110 volts. Compatible with all BH-USA flat-plate hoists and gear plates. Fits other brands that use the standard 4 ft x 2 ft flat-plate mounting holes. The motor is a NEMA 56-frame motor. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing serves as a barrier against dirt, insects, and water entering the motor. This motor has a maximum runtime of 15 minutes. Finished in black. Includes colored T-wires. The electric motor comes with easy-to-follow instructions. Included are BH-USA’s equipment guide and wiring instructions.

Clawfoot Motors

A clawfoot motor is a general-purpose motor. At BH-USA, these are used with flat-plate hoists. With clawfoot mounting slots, a standard flat-plate hoist can be easily mounted. By attaching a belt and pulley to the drive shaft, the motor can rotate the pulley. The belt will move as a result.

Safety Caution

It is BH-USA’s recommendation to hire a licensed electrician for wiring or rewiring electrical components

Nameplate Specifications
Output HP: .75 (3/4) HP
Output KW: 0.56 kW
Frequency: 60 Hz
Voltage: 115/208-230 V
Current: 10.8/5.3-5.4 A
Speed: 1725 rpm
Service Factor: 1.25
Phase: 1
Efficiency: 70 %
Power Factor: 64
Duty: 15 Minute
Insulation Class: F
Design Code: N
KVA Code: K
Frame: S56
Enclosure: Totally Enclosed Non Ventilated
Thermal Protection: No
Ambient Temperature: 40 °C
Drive End Bearing Size: 6203
Opp Drive End Bearing Size: 6203
UL: Recognized
IP Code: 43
Number of Speeds: 1
Technical Specifications
Electrical Type: Capacitor Start Induction Run
Starting Method: Across The Line
Poles: 4
Rotation: Selective Counterclockwise
Mounting: Rigid Base
Motor Orientation: Horizontal
Drive End Bearing: Ball
Opp Drive End Bearing: Ball
Frame Material Rolled Steel
Shaft Type: T
Assembly/Box Mounting: F1 ONLY

Product Overview

  • Flat-plate mounting design
  • NEMA 56 electric motor
  • UL Listed & CSA approved
  • TENV – totally enclosed, non-venting
  • Standard duty, dual voltage
  • Single-phase motor with a start capacitor
  • Powder-coated black from the factory
  • 15 min. maximum run time