Marathon 1 HP Painted Wired Boat Lift Motor
The Leeson 1 HP Painted Wired Boat Lift Motor is a dual voltage, standard duty single-phase electric motor with a start capacitor. Painted black from the factory. Fits normal gear plate mounting holes. It works with all BH-USA boat hoists and boat lifts. Also works with various other standard-sized flat-plate hoists.
NEMA 56 frame motor. UL listed and CSA approved. Features a totally enclosed, non-venting housing (TENV). The TENV housing helps prevent dirt and insects from getting into the electric motor. Maximum run time of 15 minutes. Easy-to-follow wiring diagrams included with the Marathon 1 HP Painted Boat Lift Motor. Features colored T-wires. The package includes a cross-reference wire chart for all Leeson Electra-gear motors.
Does not work on direct-drive boat hoists or boat lifts.
Factory Electric Motors
Wired 220v from the factory (motor only). It allows for rewiring to 110v. Does not include an in-line GFCI, control cable, or drum switch.
Factory Wired Motors
Includes an inline GFCI, control cable, and drum switch. Wired to the voltage, switch type, and length of control cable selected.
BH-USA recommends using a licensed electrician to wire or rewire any electrical components.
Clawfoot Motors
It is a general-purpose motor most commonly used with a flat-plate hoist. The clawfoot mounting slots help install on a flat-plate hoist. Installing a belt and pulley onto the drive shaft allows the motor to turn the pulley. This will move the belt.
Specifications
Motor Specifications | |
Model #: | 5KC49PN0216 |
Max Run Time: | 15 Minutes |
Dimensions: | 8 3/4 in. x 11 3/4 in. x 6 in. |
Weight: | 30 lbs. |
Horsepower: | 1 HP |
Mounting Type: | 56 |
RPM: | 1725 |
Service Factor: | 1.25 |
Voltage: | 115 / 230 |
Phase: | 1 |
Amps: | 13.6 (110v) / 6.7 (220v) |
SFA: | 7.9 |
Herz: | 60 |
AMB: | 40°c |
Frame: | 56 |
HSG: | TENV |
Code: | K |
Insulation: | B |
Shaft Diameter | 5/8 in. |
2 in. Aluminum Motor Pulley Specifications | |
Dimensions: | 2 in. L x 2 in. W x 2 in. H |
Weight: | .3 lbs. |
Material: | 6061-T6 US aluminum |
Construction: | Machined |
Fits: | 56 (Clawfoot) |
Belt Style: | Single belt |
Bore Type: | Center bore |
Bore Size: | 5/8 in. (.630 in.) |
Set Screw: | Yes |
Set Screw Size: | 3/8 in. x 3/8 L |
Set Screw Thread: | 3/8-16 Coarse |
Set Screw Thread Count: | 16 |
Drum Switch Specifications | |
Dimensions: | 3 1/2 in. x 4 1/2 in. x 4 1/2 in. |
Max Amps: | 20 |
Max HP: | 1 1/2 HP |
Compliance: | UL, NEMA, CE, SA |
VAC: | 120-240 |
Weight: | 1.2 lbs. |
Box Color: | Gray |
Handle Color: | Red |
Switch Type: | Varies |
Housing Material: | Plastic |
110v GFCI Harness Specifications | |
Plug Type: | 3-US 110 V Standard |
Control Cable Size: | 14/5 SJTW |
GFCI to Plug: | 4 1/2 in. |
Drum Switch Cable to GFCI Plug: | 60 in. |
Control Cable to Motor Dimensions: | 16 ft. – 45 ft. (Varies by Users’ Selection) |
Color | Black |
Class | A-Rainproof |
Catalog Number | 303385214 |
AMP | 15 |
Hz | 60 |
Watt | 1875 |
Volt | 125 |
Reset Type | Automatic |
Cord Diameter Range | .28 – .65 |
Warranty | 30 Days |
220v GFCI Harness Specifications | |
Plug Type | US 240 Volt NEMA 6-15 |
Control Cable Size: | 14/5 SJTW |
GFCI to Plug: | 4 1/2 in. |
Drum Switch Cable to GFCI Plug: | 60 in. |
Control Cable to Motor Dimensions: | 16 ft. – 45 ft. (Varies by Users’ Selection) |
Color | Black |
Class | A-Rainproof |
Catalog Number | 25090 |
AMP | 15 |
Hz | 50/60 |
Watt | 3600 |
Volt | 240 |
Reset Type | Automatic |
Cord Diameter Range | .28 – .65 |
Warranty | 30 Days |
Product Overview
- Clawfoot mounting design
- NEMA 56 frame electric motor
- UL Listed & CSA approved
- TENV - totally enclosed, non-venting
- Standard duty, dual voltage
- Single-phase motor with a start capacitor
- 15 min. maximum run time