Single Pillow Block Pipe Support Kit

0 Reviews
$99.99
UPC: 091037090881
SKU: BH09088

Only 14 left in stock

IN STOCK. ONLY 14 LEFT!

Shipping Policy
×

Shipping

BH-USA has partnered with UPS to offer Ground, Next Day Air, 2nd Day Air, and 3 Day Select services to our customers. In order to ship with these methods, the order must meet UPS's requirements.

Freight

Your order will be shipped via the most cost-effective method possible. All shipping and handling charges are the responsibility of the customer. Additionally, they are responsible for any delivery issues that may hinder delivery. In such cases, extra fees can apply, such as residential delivery fees.

Click the button below to learn more about our ordering and shipping policies.

Our Shipping Partners shipping modal logos

Qty.



Single Pillow Block Pipe Support Kit

The Single Pillow Block Pipe Support Kit mounts directly to wood beams or wooden joists. The kit includes the single pillow block hanger bracket and 2 7/16 in. pillow blocks. Pillow block mounting fasteners included. The pillow block helps support the weight of the drive pipe. Accepts 2 3/8 in. OD (2 in. ID) drive pipes.

Single Pillow Block Hanger Bracket

Made from 1/4 in. hot-dipped galvanized steel. Feature (2) 3/4 in. pillow block mounting holes. 7 1/4 in. center-to-center on the plate. Built with (2) 1/2 in. wood beam mounting holes. Measuring 4 in. center-to-center.

2 7/16 in. Pillow Block

The 2 7/16 in. Pillow Block bearing is a pedestal used to provide support for a rotating shaft with the help of compatible bearings & various accessories. Made from cast iron housing with a chrome steel ball-bearing insert. Features (2) 3/4 in. mounting holes. Powdercoated green finish. 2 7/16 in. bearing bore. Includes 1/4 in. press-in grease fitting mounted off-center.

Wood beam mounting fasteners not included
Center mount only.

Specifications

Dimensions: 9 1/2 in. L x 3 in. W x 12 5/16 in. H
Weight: 8.85 lbs.
Material: Steel
Finish: Hot-dipped Galvanized
Wood Beam Mounting Holes: 2
Mounting Hole Size: 1/2 in.
Hole Location: Center of Flat Plate
Distance Between Holes: 4 in. (Center-to-Center)
Plate Edge to Mounting Hole: 1 1/2 in.
Hole to Block Plate Distance: 6 1/4 in.
Pillow Block Mounting Holes: 2
Mounting Hole Size: 3/4 in.
Hole Location: Center of Flat Plate
Distances Between Holes: 7 1/4 in. (Center-to-Center)
Plate Edge to Mounting Hole: 1 3/16 in.
Fits Drive Pipes: 2 3/8 in. OD (2 in. ID)
Pillow Block Bore Diameter: 2 7/16 in.
Bearing Insert Type: Ball
Locking Type: Set Screw
Housing Material: Cast Iron
Bearing Insert Material: Chrome Steel
Number of Bolts: 2
Bolt Size: 3/4 in.
Bolt Hole Center to Center: 7.25 in.
Mounting Surface to Shaft Center: 3 in.
Overall Height: 5.50 in.
Overall Width: 2.62 in.
Overall Length: 9.50 in.
Dynamic Load Capacity: 12,927 lbs.
Static Load Capacity: 8992 lbs.
Finish: Painted
Standards: ISO

Use with BH-USA pillow block hangers, recommended for center mount only. Rating is only based on proper installation with weight on the flange as the image shown. Do not attempt to hang and put a direct load on the block. Always use the BH-USA Overhead Lift Guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.

Product Overview

  • Center Mount Only
  • Wood beam/wood joist mounting bracket
  • Hot-dipped galvanized steel
  • 2 7/16 in. pillow block installs onto the block hanger bracket
  • Pillow block fasteners included
  • Accepts 2 3/8 in. OD (2 in. ID) drive pipes
  • Wood beam mounting fasteners not included

Reviews