Solid Cable Winder for Center Mount 2 in. Drive Pipe
Only 3 left in stock
Solid Cable Winder for Center Mount 2 in. Drive Pipe
The Solid Cable Winder fits over a 2 in. OD drive pipe. Used on center-mounted boat lifts. Installs where drive pipes are mounted in the center of the slip using (4) pulleys or one pipe on the side with (2) pulleys on the other side. 16 ft. cable winding split in (2) 7 ft. sections that wrap 14 ft. of 7 x 19 aircraft cable per side.
Measures 16 in. L x 2 7/8 in. OD (2 3/8 in. ID) W. Dual direction cable winder. Fits boat lift cable up to 5/16 in. thick. Made from 6061-T6 US aluminum. The solid design slides over the drive pipe. Fits 19 wraps per side. Holds 28 ft. total cable. 14 ft. per side. Mounting fasteners included.
Specifications
| Weight: | 2.4 lbs. |
| Dimensions: | 16 in. L x 2 7/8 OD in. W x 2 7/8 in. OD H |
| Cable Winder OD: | 2 7/8 in. |
| Cable Winder ID: | 2 3/8 in. |
| Wall Thickness: | 1/4 in. |
| Winder Type: | Sch. 40 |
| Cable Hole: | 3/8 in. |
| Cable Hole Amount: | 2 |
| Cable Hole Placement: | Center |
| Cable Groove: | 9/32 in. |
| Mounting Bolts Size: | 5/16 in. x 3 1/4 in. |
| Mounting Bolt Amount: | 2 |
| Mounting Bolt Type: | 316 stainless steel |
| Cable Wraps: | 19 (off each side) |
| Cable Max. Length: | Approx. 14 ft. of Cable per Side |
| Total Cable Length: | 28 ft. |
Cable winders, also known as cable savers are designed to help the cable maintain its shape while under load on the pipe. The grooves are very shallow and only intended to cradle the lower section of the cable. We routinely use these winders on cable up to 5/16” diameter. Please note, cable winders increase the outside diameter of the drive pipe and will reduce the rated lift capacity of your hoist and motor.
Product Guides
Product Overview
- 2 7/8 in. OD (2 3/8 in. ID)
- Holds 28 ft. of cable - 14 ft. per side
- Dual direction winder - 7 in. per side
- It fits BH-USA dual-pipe supports
- Made from 6061-T6 US aluminum
- Handles up to 5/16 in. thick cable
