Solid Cable Winder for Side Mount 1 1/2 in. Drive Pipe
The Solid Cable Winder fits over a 1 1/2 in. ID drive pipe. Used on side-mounted boat lifts. Installs where dual-drive pipes are mounted on either side of the boat using two hoists to lift one boat and cable drops directly from the pipe.
Measures 15 1/4 in. L x 2 3/8 in. OD (1 15/16 in. ID) W. Single direction cable winder. Fits boat lift cable up to 5/16 in. thick. Made from 6061-T6 US aluminum. The solid design slides over the drive pipe. Fits 36 wraps. Holds 24 ft. of cable. Mounting fasteners included.
|Dimensions:||15 1/4 in. L x 2 3/8 OD in. W x 2 3/8 in. OD H|
|Cable Winder OD:||2 3/8 in.|
|Cable Winder ID:||1 15/16 in.|
|Wall Thickness:||1/4 in.|
|Winder Type:||Sch. 40|
|Cable Hole:||3/4 in.|
|Cable Groove:||9/32 in.|
|Mounting Bolts Size:||5/16 in. x 3 1/4 in.|
|Mounting Bolt Amount:||2|
|Mounting Bolt Type:||316 stainless steel|
|Cable Max. Length:||Approx. 24 ft. of Cable per Side|
Cable winders, also known as cable savers are designed to help the cable maintain its shape while under load on the pipe. The grooves are very shallow and only intended to cradle the lower section of the cable. We routinely use these winders on cable up to 5/16” diameter. Please note, cable winders increase the outside diameter of the drive pipe and will reduce the rated lift capacity of your hoist and motor.
- 2 3/8 in. OD (1 15/16 in. ID)
- Holds 24 ft. of cable
- Single direction winder
- It fits BH-USA dual-pipe supports
- Made from 6061-T6 US aluminum
- Handles up to 5/16 in. thick cable