DLB1500A Plated Brake Winch
$ 257.17
SKU: DL14964
UPC: 085077149647
Only 6 left in stock
Special Order
Stock Policy
Shipping Policy
Return Policy
DLB1500A Plated Brake Winch
The DLB1500A Plated Brake Winch is for horizontal pulling and vertical lifting. 1,500 lb. load capacity. Self-locking winch. The winch includes a 9 3/8 in. handle with an ergonomic black handle grip. Built-in fully automatic friction brake. The fully automatic friction brake supplies constant, positive holding action when the handle is released. When cranking stops, the load stops preventing runaway loads. Made in the USA.
This winch requires a 75 lb. minimum operating load to function properly.
Specifications
| Model: | DLB1500A |
| Rated Capacity: | 1500 lb. / 681 kg |
| Min. Operating Load Required: | 75 lb. / 34 kg |
| Drum Hub Diameter: | 2 1/2 in. |
| Gear Ratio: | 5.4:1 |
| Handle Length: | 9 3/8 in. |
| Maximum Mechanical Advantage: | 36.8 |
| Maximum Drum Capacity: | 1/4 in. Cable x 60 ft. or 31 ft. Strap |
| Product Dimensions: | 7 1/4 in. x 8 1/2 in. x 6 27/32 in. |
DLB vs. B-Series Brake Winch Comparison
| Feature | DLB- Series | B1200s | B1500s/ B2500s/ B3503 |
|---|---|---|---|
| Four models available with an optional freewheel lever to put in freewheel mode | X | ||
| Accepts 2″ wide strap | X | ||
| Driveshaft gear teeth and reel gear teeth are induction hardened for increased strength | X | X | |
| All gear and shaft surfaces are case hardened for maximum strength | X | ||
| Larger 8 pitch gear teeth for increased strength | X | ||
| Largest 6 pitch gear teeth for maximum strength | X | ||
| Multiple drum hub diameter options for increased lifting and pulling speed | X | X | |
| Standard 12-1/4″ handle | X | X | |
| Braking mechanism protected by an external cover | X | X | |
| All drive gears protected by an external cover | X | ||
| Internal reel gears for more gear contact (reduces wear and increases strength) | X | ||
| Driveshaft needle bearings to reduce wear | X | ||
| Intended for a higher frequency and duration of use | X |
Product Overview
- Dutton-Lainson® brake winch for horizontal pulling and vertical lifting applications
- 1,500 lb. capacity
- 9-3/8 in. handle with ergonomic handle grip
- Built-in fully automatic friction brake holds load exactly in position when raising and lowering
- Zinc plated TUFFPLATE® finish
- Made in the U.S.A.
- NOTE: This winch requires a 75 lb. minimum operating load to function properly.
Features of both DLB and B-series brake winches include:
- Laminated, high carbon steel gears for longer life
- All gears in models DLB800A through B3503 are heat treated for increased strength
- Permanently lubricated bearings on driveshafts are maintenance-free
- Heavy-duty steel handles with ergonomic molded grips
- Copper brazed driveshaft gears for durability
- Rigid, welded reel construction for added strength
- Load matched gear ratios for easier cranking
- Zinc plated Tuffplate® finish
- Slotted mounting holes for easy installation
- Heavy gauge embossed and reinforced steel bases for extra strength
- Meets ASAE Safety Standard S361.3
- The handle is an integral part of the braking mechanism
Product Guides
Related Products
You may also like...
-
Sur-Mark Marker Buoys
$485.20 Add to cart -
Vinyl Coated Foam Life Rings
$66.73 – $84.52 Select options -
Deluxe Sewn Flags
$45.18 – $69.50 Select options -
CLEARANCE
