Drive Pipe Reduction Sleeve
$ 17.99
SKU: 30012
UPC: 602573010327
In stock
Special Order Item(Non-Returnable)
BH-USA Return Policy
BH-USA Stock Policy
Drive Pipe Reduction Sleeve
The Drive Pipe Reduction Sleeve takes a 2 1/2 in. OD (2.063 ID) drive pipe and reduces it to a standard 2 in. OD (1.5 in. ID) drive pipe. The sleeve slides over the 2 in. OD (1.5 in. ID) drive pipe and both pipes are installed on the worm gear of a flat-plate hoist. Made from 6063-T52 SCH. 40 aluminum pipe. Features (2) 1/2 in. mounting bolts. Line up mounting holes on the reduction sleeve and 2 in. OD (1.5 in. ID) drive pipe and install into worm gear.
Aluminum Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high-quality surface finish. In heat-treated conditions, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. Its improved corrosion resistance comes from the lack of copper in its elemental composition.
Specifications
| Dimensions: | 9 in. L x 2 1/2 in. W x 2 1/2 in. H |
| Material: | Aluminum |
| Type: | 6063-T52 |
| Drive Pipe Style: | SCH 40 |
| Drive Pipe Size: | 2 1/2 in. OD (2.063 in. ID) |
| Drive Pipe Reduction Size: | 2 in. OD (1.5 in. ID) |
| Wall Thickness: | .203 in. |
| Wt/Lin ft. | 2.004 |
| Application: | Flat-plate hoists |
Product Overview
- Reduces 2 1/2 in. OD (2.063 in. ID) to 2 in. OD (1.5 in. ID) drive pipes
- Fits over the pipe and installs on the flat-plate hoist worm gear
- SCH 40 aluminum pipe
- Made from 6063-T52 aluminum alloy
