Elite 1 1/2 HP Stainless C-Face Wired Boat Lift Motor
$703.89 - $848.21
Return Policy
Elite 1 1/2 HP Stainless C-Face Electric Motor
The Elite Stainless C-Face Electric Motor are single phase, dual-voltage motors. It comes from the factory wired at 220v, but a licensed electrician can convert the wiring to make it a 110v electric motor. Made from stainlesss steel. The NEMA 56 shaft is 0.625 inch thick and 1.88 inch extruding from the motor housing. UL Recognized (C-UL-US). It uses a capacitor to start.
TENV (totally enclosed, non-ventilated) housing. TENV housing prevents dirt, insects, and water from entering the motor. 15 minutes maximum runtime. Includes 1 inch long x 1/4 inch wide keystock, colored T-wires, easy-to-follow wiring instructions, BH-USA equipment guide, and wiring instructions. A motor wire harness is installed directly on the electrical motor. Depending on your preference, you can select a maintained (lock-on) or momentary (spring-loaded) drum switch type. The in-line GFCI has a built-in test and reset button.
|
The C-face input electric motor is used in enclosed boat hoists that do not have belt drives, enclosed gear reduction gearboxes, or worm gear reduction gearboxes. C-face electric motors fit BH-USA A-Drive, BH-USA Enclosed Drive, AMS E-Drive, AMS Series, and Golden C-Drive. Electric motors are compatible with enclosed boat hoists that have a standard C56 flange. |
When wiring or rewiring electrical components, BH-USA recommends hiring a licensed electrician.
| 3,000 lbs. | 4,000 lbs. | 7,000 lbs. | |||
| Gear Type: | 40:75 | 40:75 | 40:75 | 40:90 | |
| HP: | 3/4 | 1 | 1 | 1 1/2 | |
| Finish: | Stainless Steel | Painted | Stainless Steel | Stainless Steel | |
| Output Torque: | 3.699 in./lbs. | 4.943 in./lbs. | 4.943 in./lbs. | 7.399 in./lbs. | |
| Motor Frame: | C-Face | C-Face | C-Face | C-Face | |
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 37.35 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 11.75 in. | Product Width: | 6.50 in. |
| Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93049 | Retail SKU: | 93100 |
Nameplate Specifications |
|||
| HP: | 1 | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 15.4 (115v) / 7.7 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 17.6 (115v) / 8.8 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | E |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 10.0 in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
| Capacitor SKU #: | BH02246 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Boat Lift Switch Specifications |
|||
Maintained |
Momentary |
||
| Model #: | CA0200034I-B96IQ6R | Model #: | CA0200037I-B96IQ6R |
| Retail SKU #: | BH09014 | Retail SKU #: | BH09015 |
| Weight: | 1.25 lbs. | Weight: | 1.25 lbs. |
| Box Color: | Light Grey | Box Color: | Light Grey |
| Housing Length: | 4.5 in. | Housing Length: | 4.5 in. |
| Housing Width: | 3.5 in. | Housing Width: | 3.5 in. |
| Housing Height: | 4.5 in. | Housing Height: | 4.5 in. |
| Handle Color: | Red | Handle Color: | Red |
| Handle Length: | 3.0 in. | Handle Length: | 3.0 in. |
| Handle Width: | 1.1875 in. | Handle Width: | 1.1875 in. |
| Handle Height: | 1.3125 in. | Handle Height: | 1.3125 in. |
| Country of Origin: | Italy | Country of Origin: | Italy |
Technical Specifications |
|||
Maintained |
Momentary |
||
| Amps: | 20 | Amps: | 20 |
| VAC | 600 | VAC | 600 |
| Torque: | Tight | Torque: | Tight |
| Certification: | EN 60947-3 | Certification: | EN 60947-3 |
| Certification: | CE | Certification: | CE |
| Certification: | C-UL-US Listed | Certification: | C-UL-US Listed |
Cam Diagram |
|||
| — | 230v | 400v | 690v |
| AC3-kW(A) 1 ph | — | 3.7(12) | — |
| AC3-kW(A) 3 ph | 4(13) | 7.5(14) | 7.6(8) |
| AC-23-kW(A) 1 ph | 3(17) | — | — |
| AC-23-kW(A) 3 ph | 6.5(17) | 9(9) | 9(9) |
VAC Diagram |
|||
| HP/V | 1 ph | 3 ph | — |
| 120 | 1.6 | — | — |
| 200 | — | 5 | — |
| 240 | 3 | 7.5 | — |
| 480 | — | 10 | — |
| 600 | — | 10 | — |
GFCI Wire Harness Specifications |
|||
| 110v | 220v | ||
| Manufacturer: | Southwire Company | Manufacturer: | Southwire Company |
| Plug Type: | 3-US 110 V Standard | Plug Type: | US 240 Volt NEMA 6-15 |
| VAC: | 125 | VAC: | 240 |
| Hz: | 60 | Hz: | 50/60 |
| Amps: | 15 | Amps: | 15 |
| Watts: | 1875 | Watts: | 3600 |
| Type: | Rainproof Class A | Type: | Rainproof Class A |
| GFCI Type: | In-line | GFCI Type: | In-line |
| Cable Type: | 14/5 SJTW | Cable Type: | 14/5 SJTW |
| GFCI to Plug: | 4.5 in. | GFCI to Plug: | 4.5 in. |
| Cord Diameter Range: | 0.28 – 0.65 in. | Cord Diameter Range: | 0.28 – 0.65 in. |
| Country of Origin: | Honduras | Country of Origin: | Honduras |
| UL: | Listed | UL: | Listed |
| CSA: | Certified | CSA: | Certified |
| Reset Button: | Yes | Reset Button: | Yes |
| Reset Type: | Automatic | Reset Type: | Automatic |
| BH-USA SKU: | 12211 | BH-USA SKU: | 12228 |
| Catalog #: | 303385214 | Catalog #: | 25090 |
Product Overview
- C-Face mounting design
- TENV enclosure prevents dirt and elements from entering the motor
- Durable stainless steel frame, capacitor case, and conduit box cover
- Double-shielded bearings extend the service life of the motor
- Time rated 15-minute duty cycle
- UL Recognized & CSA Approved
- Suitable for outdoor environments and weather resistant
These are Marks consumers rarely see because they are specifically used on component parts that are part of a larger product or system. These components may have restrictions on their performance or may be incomplete in construction. The component recognition marking is found on a wide range of products, including some switches, power supplies, printed wiring boards, some kinds of industrial control equipment and thousands of other products.
Just as with the UL Listing and Classified Marks, there are three variations of UL’s Recognized Component Mark: one for the United States only, one for Canada only and one for both the United States and Canada. The C-UR Mark is applied to components only used in the Canadian market. Components with this type of Mark have been evaluated to Canadian standards. The optional C-UL-US Component Recognition Mark indicates compliance with both Canadian and U.S. requirements. UL encourages manufacturers distributing UL Recognized Components evaluated for both countries to use this combined Mark, but they may continue using separate UL Recognized Component Marks for the United States and Canada.
Components covered by UL’s Recognized Component program are intended to be installed in another device, system or end product. They are to be installed at the factory, not in the field and they may have restricted performance capabilities that limit their use. When a complete product or system containing UL Recognized Components is evaluated, the end-product evaluation process can be streamlined.
The UL component evaluation process may include a construction examination and testing. Guidelines addressing the suitability of a component when used in an end product are noted in UL’s test report as conditions of acceptability. This information can also be found in Product iQTM.
All components carrying the UL Recognized Component Mark are covered by UL’s Follow-Up Services program to determine continued compliance with UL’s requirements.
