Elite 3/4 HP Stainless C-Face Electric Motor
In stock
Elite 3/4 HP Stainless C-Face Electric Motor
The Elite Stainless C-Face Electric Motor are single phase, dual-voltage motors. It comes from the factory wired at 220v, but a licensed electrician can convert the wiring to make it a 110v electric motor. Made from stainlesss steel. The NEMA 56 shaft is 0.625 inch thick and 1.88 inch extruding from the motor housing. UL Recognized (C-UL-US). It uses a capacitor to start.
TENV (totally enclosed, non-ventilated) housing. TENV housing prevents dirt, insects, and water from entering the motor. 15 minutes maximum runtime. Includes 1 inch long x 1/4 inch wide keystock, colored T-wires, easy-to-follow wiring instructions, BH-USA equipment guide, and wiring instructions.
|
The C-face input electric motor is used in enclosed boat hoists that do not have belt drives, enclosed gear reduction gearboxes, or worm gear reduction gearboxes. C-face electric motors fit BH-USA A-Drive, BH-USA Enclosed Drive, AMS E-Drive, AMS Series, and Golden C-Drive. Electric motors are compatible with enclosed boat hoists that have a standard C56 flange. |
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 25.65 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.50 in. | Product Width: | 6.75 in. |
| Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93047 | Retail SKU: | 93082 |
Nameplate Specifications |
|||
| HP: | 0.75 (3/4) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 11.2 (115v) / 5.6 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 12.4 (115v) / 6.2 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | H |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recongnized | UL Stamp: | C-UL-US |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 8.5 in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 700 uF |
| Capacitor SKU #: | BH02245 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Product Overview
- C-Face mounting design
- TENV enclosure prevents dirt and elements from entering the motor
- Durable painted frame, capacitor case, and conduit box cover
- Double-shielded bearings extend the service life of the motor
- Time rated 15-minute duty cycle
- UL Recognized & CSA Approved
- Suitable for outdoor environments and weather resistant
