PWC Spool Bearing Block
The PWC Spool Bearing Block is used on the 1,500 lb. Belt-Driven PWC Hoist. The block installs with (2) 5/16, 18 thread, mounting holes on the side of the gearbox. It installs between the spool and the side of the gearbox. The center bore accommodates the spool mounting rod. The 1 in. ID bronze bushing comes installed in the center of the block. Measures 2 in. x 4 in. x 1/2 in. thick. Made from 6061-T6 US aluminum.
|Material Type:||6061-T6 US Aluminum|
|Dimensions:||4 in. L x 2 in. W|
|Mounting Hole Size:||5/16 in.|
|Mounting Hole Type:||Threaded|
|Thread Count:||18 thread|
|Bore ID:||1 in.|
|Fitting Type:||Center mount|
|Fitting Style:||Bronze Bushing|
To enable existing hoist owners to repair or replace machined items, BH-USA makes available machine parts used exclusively in the Boat Hoist USA brand flat-plate hoist.BH-USA brand machined parts should NEVER be used with any other brand’s flat-plate hoist or machined parts. BH-USA does not warranty any individual machine part or any other re-built/repaired flat-plate hoists. Lift-Tex Inc. does not assume ANY liability for damages to a person or property when machined parts are used in the re-build of a flat plate hoist, regardless of brand. The purchase of, and use of any machine part sold by BH-USA is at the sole risk of the user and is non-returnable, and carries no warranty. BH-USA does not guarantee any individual machined part will fix an existing problem or work as designed. It is the recommendation of BH-USA to purchase a new flat plate hoist that has been built and tested onsite at BH-USA rather than to attempt to repair an existing hoist.
- (2) 5/16 mounting holes with 18 thread
- 1 in. ID center bronze bushing
- Installs on the spool and side of the gearbox
- Made from 6061-T6 US aluminum
- Fits 1500 lb. belt-driven PWC hoist & gearbox