12,000 lb. Galvanized Steel Pontoon Boat Cradle

Made from hot-dipped galvanized steel, the 12000 lb Galvanized Steel Pontoon Boat Cradle is designed for pontoon boats up to 12000 lbs. Provides equal distribution and eliminates cable slack that platform cradles may cause during the lifting process. It is easy to install. Adjustable fasteners are included. It ships freight. Two adults can handle it easily.

We do not include wood cradle bunks.

6 in. Galvanized Cradle Beam

The 6-inch galvanized cradle beam is used to construct a boat cradle. Using wood bunks mounted on cradle beams shaped like the hull of the watercraft will allow it to be lifted. There are welded endplates where the boat lift cable runs. The cables wind up lifting the beams.

The 6 in. web runs from top to bottom of the beam. The 5/8 in. machine punched centered holes on the endplates. 5/16 in. endplate thickness. Made from steel. Hot-dipped galvanized finish. Safely holds 1,500 lbs. distributed weight.

Galvanized Pontoon V Bunk Bracket Kit

The Galvanized Pontoon V Bunk Bracket Kit allows (2) wooden cradle bunks to be mounted in a “v” shaped pattern. Made from hot-dipped galvanized steel.  The brackets mount to on top of the boat cradle beam and use backplates to secure it in place. It fits with 4 in., 5 in., & 6 in. galvanized cradle beams.

The (4) carriage bolts are used to secure the wood bunks (not included) onto the top bracket. The (4) hex head bolts secure the top bracket to the bottom bracket. (4) 5/8 in. mounting holes.

Wood bunks not included.

Galvanized Guidepost Stanchion Kit

The Galvanized Guidepost Stanchion Kit fits 4 in. to 6 in. wide galvanized cradle beams. Made from hot-dipped galvanized steel. Easy to install on preexisting boat cradle beams. Allows 2 in. ID PVC pipe to slide over the stanchion.

Includes all galvanized mounting fasteners.

Boat Cradle Guidepost

The Boat Cradle Guidepost slides over the guidepost stanchion on a boat cradle. A 1/4 in. hole is drilled into the cap. Made from PVC. Cap comes installed on the pipe. The drilled hole allows water to drain through the guidepost when lifting or lowering your boat cradle. Measures 2 3/8 in. OD (2 in. ID). Schedule 40 pipe. You can add an option guidepost bumper for higher visibility of the boat cradle.

36 in. Solid Guidepost Bumper

The 36 in. Solid Guidepost Bumper slides over a 2 in. PVC guidepost. The guidepost covers the boat lift cable coming into the boat cradle. Features (3) distinct colors; red, royal blue, and black. Individually or sold in packs of four bumpers. Four bumpers typically are enough to be used on each end of the cradle beam.

Designed with 1 in. diameter foam insert. Made from 200 denier nylon shells. Protects boat lift cable and the watercraft’s gel coating. Measures 36 in. x 2 3/8 in. x 2 3/8 in. Made the boat cradle more visible while docking your boat.