12K Aluminum Four Post Pile Mount Lift Kit
$ 7,499.43
SKU: 25344
UPC: 672975253448
Special Order Item(Non-Returnable)
BH-USA Return Policy
BH-USA Stock Policy
12K Aluminum Four Post Pile Mount Lift Kit
This is not a complete pile mount boat lift.
Purchase Entire 12,000 lb. Four Post Pile Mount Lift
12K Aluminum Four Post Pile Mount Lift Kit features a no-weld design. Made from 6061-T6 US aluminum. Features all 3/4 in. 316 stainless steel fasteners. The kit does not include cradle bunks, bunk mounting kit, guideposts, guidepost stanchions, or guidepost bumpers.
Includes (2) A-Drive 40:90 Double Worm Reducer Gearbox is a direct-drive gearbox designed with a double worm gear reducer. Featured on the 7,000 lb boat hoist of the A-Drive series. The 7,000 lb A-Drive boat hoist is powered by a 1 1/2 HP wired motor. The gearbox housing is made of solid aluminum with a marine-grade finish. The gearbox ratio is 450:1. This gearbox includes bronze-on-steel gears. The enclosed gears are permanently lubricated with BH-USA gear grease. No leaks are guaranteed. Includes cast flange mount for the output shaft. Stainless steel fasteners are used.
Features (2) Elite Stainless C-Face Electric Motor are single phase, dual-voltage motors. Made from stainlesss steel. The NEMA 56 shaft is 0.625 inch thick and 1.88 inch extruding from the motor housing. UL Recognized (C-UL-US). It uses a capacitor to start. TENV (totally enclosed, non-ventilated) housing. TENV housing prevents dirt, insects, and water from entering the motor. 15 minutes maximum runtime. Includes 1 inch long x 1/4 inch wide keystock, colored T-wires, easy-to-follow wiring instructions, BH-USA equipment guide, and wiring instructions. A motor wire harness is installed directly on the electrical motor. Comes factory-wired with a 110v maintained (lock-on) cam switch with an in-line GFCI has a built-in test and reset button. One motor wired for 16 ft. the other for 45 ft.
The kit does not include cradle bunks, bunk mounting kit, guideposts, guidepost stanchions, or guidepost bumpers.
Specifications
General Specifications |
|||
| Total Capacity: | 12,000 lbs. | Lifting Capacity: | 10,000 lbs. / Beam |
| Motor Size: | 1 HP | Gearbox Size: | 40:90 |
| Hoist Type: | A-Drive | Material: | Aluminum |
| Packaging: | 15 ft. Wood Crate | Material Type: | 6061-T6 US |
| Weight: | 900 lbs. – 950 lbs. | Minimum Piling Size: | 8 in. Diameter |
Gearbox Specifications |
|||
| Gearbox Type: | Double Worm Reduction | Gear Type: | 40:90 (High Efficiency) |
| Weight: | 38.3 lbs. | Case Material: | Cast Aluminum |
| Gearbox Length: | 12.42 in. | Box Type: | Fully Enclosed |
| Gearbox Width: | 7.56 in. | Lube: | Specialty-blended Grease |
| Gearbox Height: | 14.57 in. | Warranty: | 5 Years |
| Actual Ratio: | 450:1 | Output Shaft: | 1.25 in. |
| Motor Mount Type: | NEMA 56c | Input Motor Shaft: | 0.625 in. (5/8) |
| Pipe Flange Box Length: | 9.37 in. | Pipe Bolt Mount Hole-to-Bolt: | 4.59 in. |
| Pipe Flange Box Width: | 7.58 in. | Motor Mount Hole-to-Hole Mount: | 4.15 in. |
| Pipe Flange Box Height: | 8.11 in. | 1 1/2 HP Output Torque: | 7.399 in. / lbs. |
| Motor Mount Bolt Holes: | 4 | Motor Mount Bolt Size: | 0.4375 in. (7/16) |
110v Motor Specifications |
|||
|---|---|---|---|
| Weight: | 28.60 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.75 in. | Product Width: | 6.50 in. |
| Product Height: | 9.0 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93048 | Retail SKU: | 93091 |
| HP: | 1 | Voltage: | 115v |
| Phase: | 1 | Amps: | 15.6 (115v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 17.5 (115v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | H |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 9.0Â in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
| Capacitor SKU #: | BH02246 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Cam Switch Specifications |
|||
| Maintained | |||
| Model #: | CA0200034I-B96IQ6R | Handle Color: | Red |
| Retail SKU #: | BH09014 | Handle Length: | 3 in. |
| Housing Length: | 4.5 in. | Handle Width: | 1.1875 in. |
| Housing Width: | 3.5 in. | Handle Height: | 1.3125 in. |
| Housing Height: | 4.5 in. | Country of Origin: | Italy |
| Box Color: | Light Grey | Weight: | 1.25 lbs. |
| Amps: | 20 | Certification: | EN 60947-3 |
| VAC | 600 | Certification: | CE |
| Torque: | Tight | Certification: | C-UL-US Listed |
110v GFCI Wire Harness Specifications |
|||
| Manufacturer: | Southwire Company | GFCI to Plug: | 4.5 in. |
| Plug Type: | 3-US 110 V Standard | GFCI to Plug: | 4.5 in. |
| VAC: | 125 | Cord Diameter Range: | 0.28 – 0.65 in. |
| Hz: | 60 | Country of Origin: | Honduras |
| Amps: | 15 | UL: | Listed |
| Watts: | 1875 | CSA: | Certified |
| Type: | Rainproof Class A | Reset Button: | Yes |
| GFCI Type: | In-line | Reset Type: | Automatic |
| Cable Type: | 14/5 SJTW | BH-USA SKU: | 12211 |
Cable & Fastener Specifications |
|||
| Cable Diameter: | 5/16 in. | Fastener Size: | 5/16 in. |
| Cable Make: | Stainless Steel | Fastener Material: | Stainless Steel |
| Cable Length: | 36 ft. | Cable Configuration: | Compounded |
Beams & Drive Pipe Specifications |
|||
| Limit Switch Bracket | Bracket Included, Limit Switch Optional | Top Beam Dimensions: | 12 ft. 7 in. L x 3 1/2 in. W x 6 in. H |
| Top Beam Type: | Channel | Top Beam Material: | 6061-T6 US Aluminum |
| Drive Pipe Finish: | Hot-Dipped Galvanized | Drive Pipe Type: | Sch. 40 |
| Beam Weight: | 4.715 lbs. / ft. | Pipe Bearings: | 4 / Beam |
| Pipe Bearings Material: | Bronze | Bearing Maintenance | Grease Fittings |
| Grease Fitting Size: | 1/4 in. | Cable Winders: | 2 |
| Cable Winder Style: | Side-Mount (Boat Lift Style) | Cable Winder Type: | Single Direction |
| Cable Winder Fits: | 1.5 in. ID Drive Pipe | Drive Pipe Dimensions: | 12 ft. 4.5 in. L (1,5 in. ID) |
| Cradle Beam Dimensions: | 12 ft. 6 in. L x 6 in. H x 5 in. Flange | Cradle Beam Weight: | 78.83 lbs. |
| Cradle Beam Material: | 6061-T6 US aluminum | Sheave Housing Measurements: | 6 in. L x 4 in. W x 5 1/2 in. H |
| Sheave Housing Fits: | 5 in. flange (I-beam) | Sheave Housing Fasteners: | 316 stainless steel |
| Sheave Housing Accepts: | 4 in. sheave w/ bronze bushing | Sheave Bolt Bore: | 3/4 in. |
| Sheave Housing Material: | 6061-T6 US aluminum | Sheave Mounting Hex Head Bolts: | (4) 1/2 in. x 2 1/2 in. stainless steel |
| Sheave Housing Lock Washers: | (4) 1.2 in. stainless steel | Sheave Housing Nuts: | (4) 1/2 in. stainless steel |
| Dimensions: | 14 ft. x 8 in. H x 5 in. flange | Max Flange Size: | 5 in. Flange |
| Angle: | 19 degrees | Weight: | 2.898 lbs. / linear ft. |
| Material: | Aluminum | Material Type: | 6061-T6 |
Product Overview
- No Weld Design
- Marine Grade 6061-T6 USA Aluminum
- Rated Up to 12,000 lbs.
- Stainless Steel Fasteners Included
- Complete & Ready to Install
Related Products
You may also like...
-
Galvanized Flat Washers
$0.27 – $0.47 Select options -
Galvanized Nuts
$0.10 – $0.53 Select options -
Galvanized Dual Pipe Support
$139.29 – $207.10 Select options -
Galvanized Split Lock Washers
$0.10 – $0.45 Select options
