12,000 lb. Aluminum Four Post Pile Mount Lift

0 Reviews
$8,941.02
SKU: 36471
UPC: 091037364715

AVAILABLE

Qty.



12,000 lb. Aluminum Four Post Pile Mount Lift

The 12,000 lb. Aluminum Four Post Pile Mount Lift mounts on the top of 4 dock pilings. Made from 6061-T6 US aluminum. No weld design. 12,000 lb. lifting capacity.

Includes stainless steel cable, stainless steel mounting fasteners, and hot-dipped galvanized drive pipe. Includes (2) hoists on each top beam. Uses compounded 33 ft. of 7 x 19 aircraft cable. Aluminum cradle beams and bunks included.

Pile mount bracket long bolts to mounting to dock pilings not included.

Freight Shipping Policy

Questions about shipping? Review our shipping policy.

Lifting Capacity Gear Ratio Motor Horsepower Motor Finish Piling Amount Cable Configuration Cable Thickness Cable Length
6,000 lbs. 40:75 3/4 HP Stainless steel 4 Straight-Line 5/16 in. 15 ft.
8,000 lbs. 40:75 1 HP Stainless steel 4 Straight-Line 5/16 in. 15 ft.
9,000 lbs. 40:75 1 HP Stainless steel 4 Compounded 5/16 in. 33 ft.
12,000 lbs. 40:90 1 HP Stainless steel 4 Compounded  5/16 in. 33 ft.
16,000 lbs. 40:90 1 HP Stainless steel 4 Compounded 5/16 in. 33 ft.
20,000 lbs. 40:90 1 1/2 HP Stainless steel 4 Compounded 5/16 in. 33 ft.
20,000 lbs. 40:90 1 1/2 HP Stainless steel 6 Compounded 5/16 in. 33 ft.
24,000 lbs. 40:90 1 1/2 HP Stainless steel 6 Compounded 5/16 in. 33 ft.
30,000 lbs. 40:90 1 1/2 HP Stainless steel 8 Compounded 3/8 in. 36 ft.
All aluminum pile mount boat lifts include a BH-USA A-Drive direct-drive hoist and a c-face input wired boat lift motor.
Specifications

Type: Direct Drive Hoist
Capacity: 12,000 lbs.
Cable Diameter: 5/16 in.
Cable Make: Stainless Steel
Cable Length: 33 ft.
Cable Configuration: Compounded
Minimum Piling Size: 8 in. (diameter)
Min. Pile Height (Above Pier): 4 ft.
Electrical: UL, NEMA, GFCI protected
UL File: E464499
Limit Switch Bracket: Bracket included (Limit Switch Optional)
Weight: 900-950 lbs.
Top Beam Lifting Capacity: 10,000 lbs / Beam
Top Beam Dimensions: 12 ft. 7 in. L x 3 1/2 in. W x 6 in. H
Top Beam Type: Channel
Top Beam Material: 6061-T6 US aluminum
Drive Pipe Finish: Hot-dipped galvanized
Drive Pipe Type: Sch. 40
Beam Weight: 4.715 lbs. / ft.
Pipe Bearings: 4 / Beam
Pipe Bearings Material: Bronze
Bearing Maintenance Grease Fittings
Grease Fitting Size: 1/4 in.
Cable Winders: 2
Cable Winder Style: Side-Mount (Boat Lift Style)
Cable Winder Type: Single Direction
Cable Winder Fits: 1.5 in. ID Drive Pipe
Drive Pipe Dimensions: 12 ft. 4.5 in. L (1,5 in. ID)
Fasteners Stainless Steel
Cradle Beam Dimensions: 12 ft. 6 in. L x 6 in. H x 5 in. Flange
Cradle Beam Weight: 78.83 lbs.
Cradle Beam Material: 6061-T6 US aluminum
Sheave Housing Measurements: 6 in. L x 4 in. W x 5 1/2 in. H
Sheave Housing Fits: 5 in. flange (I-beam)
Sheave Housing Fasteners: 316 stainless steel
Sheave Housing Accepts: 4 in. sheave w/ bronze bushing
Sheave Bolt Bore: 3/4 in.
Sheave Housing Material: 6061-T6 US aluminum
Sheave Mounting Hex Head Bolts: (4) 1/2 in. x 2 1/2 in. stainless steel
Sheave Housing Lock Washers: (4) 1.2 in. stainless steel
Sheave Housing Nuts: (4) 1/2 in. stainless steel
Cradle Bunk Dimensions: 14 ft. x 8 in. H x 5 in. flange
Max Flange Size: 5 in. Flange
Angle: 19 degrees
Weight: 2.898 lbs. / linear ft.
Material: 6061-T6 US aluminum
Padding: Rubber
Padding Color: Black
Boat Hoist Rated Capacity: 7,000 lbs.
Tested Capacity: Straight line
Gear Plate Dimensions: 12.42 in. L x 7.56 in. W x 14.57 in. H
Bull Gear Ratio: 450:1
Motor Type: C-Face
Motor Flange to Driveshaft Flange Offset: 1.22 in.
Output Shaft Size: 1 1/4 in.
Input Motor Shaft Size: 5/8 in.
Motor Shaft to Drivepipe Shaft: 7.26 in.
Gear Type: 40:90
Max Run Time: 15 Minutes
Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in.
Horsepower: 1
Mounting Type: C
RPM: 1725
Service Factor: 1.15
Voltage: 115v / 230v
Phase: 1
Amps: 7.8
SFtartA: N/A
Herz: 60
AMB: 40c
Frame: 56c
HSG: TENV
Code: L
Insulation: A
Shaft Diameter 5/8 in.

Product Overview

  • Features no weld design
  • Made from marine grade 6061-T6 US aluminum
  • Rated up to 12,000 lb. lift capacity
  • Includes aluminum cradle beams and bunks
  • All stainless steel mounting fasteners
  • Includes (2) hoists mounted on the aluminum top beams

Reviews