4,000 lb. Standard Gear Plate Assembly
4,000 lb. Standard Gear Plate Assembly
The 4,000 lb Standard Gear Plate Assembly has a rated lifting capacity of up to 4,000 lbs when used with a 1 HP electric motor. BH-USA uses this gear plate with all its Standard Series flat-plate boat hoists. There are no steel-on-steel moving parts. Assembled and tested by the manufacturer. Lifetime warranty included.
The short block worm assembly has a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. Attaches directly to the gear plate. The assembly has standard flat-plate mounting holes. The 96 tooth worm gear assembly comes assembled with the gear, sleeve, backplate bearing, axle sleeve bolt, and snap rings. 1/4 inch easy-reach grease fittings are included. The gear fits standard gear plates used in flat-plate hoists.
GPA includes:
2 ft. x 1 ft. gearplate
96-tooth cast iron worm gear
Bronze worm
Short aluminum block
10 in. aluminum die-cast belt bulley
AX-34 34 in. drive belt
Specifications
General Specifications |
|||
|---|---|---|---|
| Rated Capacity: | 4,000 lbs. | Test Type: | Straight-Line |
| Dimensions: | 2 ft. x 1 ft. | Thickness: | 0.25 in. – 0.50 in. |
| Bull Gear Ratio: | 96:1 | GPA Warranty: | Lifetime |
Block Worm Specifications |
|||
| Worm Material: | Bronze | Thread: | Single |
| Worm Diameter: | 1.75 in. | Thread Direction: | Right Hand |
| Worm Bore: | 0.754 in. | Grease Fittings: | 3 |
| Block Type: | Short | Grease Fitting Size: | 0.25 in. |
| Collars Included: | 2 | Collar Set Screw Size: | 0.3125 in. |
Worm Gear Assembly Specifications |
|||
| Material: | Cast Iron | Gear Bore: | 2.875 in. |
| Diameter: | 12.75 in. | Hub Depth: | 2 in. |
Puley & Belt Specifications |
|||
| Material: | Aluminum | Type: | Die-Cast |
| Holds: | 1 Belt | Pulley Size: | 10 in. |
| Pulley Bore: | 0.75 in. | Belt Size: | 34 in. |
| Type: | Cogged | Hoist Pulley Fits: | 10 in. |
| Belt Color: | Black | Motor Pulley Fits: | 2 in. |
Product Overview
- 4,000 lb. straight line capacity
- Assembled & tested under load before shipping
- No steel-on-steel moving parts
- Includes 10 in. hoist pulley & 34 in. hoist belt
- Features industry-standard mounting holes
- Lifetime warranty
- Made in the USA
