Dual Drive Pipe Cable Attachment Kit
The Dual Drive Pipe Cable Attachment Kit attaches the end of the cable through the hole in the bolt and attaches it to drilled-out holes in the drive pipe. Allows an easy way to attach the cable to the drive pipe. Made from stainless steel. Measure 5/8 in. x 3 1/2 in. 3/8 in. cable mounting hole at the top of the bolt.
The dual kit includes (4) cable attach kits. (2) kits per drive pipe. They mount on the ends where the cable is wound. This is a complete kit for (1) boat lift. Use the malleable wire rope clips as “dead man” stops.
The hole in the bolt fits up to 5/16 in. 7 x 19 aircraft cable. Fits drive pipes up to 2 3/8 in. OD (2 in. ID). BH-USA boat lift cable winders have enlarged holes at the cable entry point designed for these bolts. The bolt allows easy adjustment of the cable and a quick clamp method for securing the cable before wrapping it on the pipe.
Side-mounted cable winders only.
Kit Includes:
5.8 in. x 3 1/2 in. hex head bolt
1/4 in. stainless steel malleable wire rope clip
5/8 in. stainless steel lock washer
5/8 in. stainless steel nut
Specifications
Bolt Size: | 5/8 in. x 3 1/2 in. |
Bolt Material: | Stainless steel |
Cable Mounting Hole Size: | 3/8 in. |
Acceptable Cable Width: | Up to 5/16 in. |
Fastener Type: | Wire rope clip |
Clip Size: | 1/4 in. |
Clip Material: | Stainless steel |
Clip Designation: | Malleable |
Washer Type: | Lock |
Washer Size: | 5/8 in. |
Washer Material: | Stainless steel |
Nut Size: | 5/8 in. |
Nut Material: | Stainless steel |
Allows user to tighten nut and pinch cable against the pipe or winder, one wrap must be on pipe at all times, a cable clamp should be used as a precaution and cable secure if load is ever directly applied to bolt.
Product Guides
Product Overview
- 5/8 in. x 3 1/2 in. bolt w/ 3/8 in. cable opening
- 1/4 in. malleable wire rope clip
- 5/8 in. lock washer & nut
- Quick cable installation
- All stainless steel fasteners
- Enough fasteners to do an entire boat lift
- Use 2 kits per drive pipe