Galvanized Dual Pipe Support for Steel Beams
The Galvanized Dual Pipe Support for Steel Beams “sandwiches” the beam without having to drill into the steel beam. Made from hot-dipped galvanized steel. Lowered sleeve designed to line up with steel mount hoist hanger. Individual sleeves for pipe preventing walking up the sleeve side. Over 19 in. between each sleeve allowing room for an optional cable winder. Designed to mount on steel I-beam, tubing, or channel. Easy-to-reach grease fittings.
Mounting fasteners included.
|Pipe Support Type:||Dual|
|Pipe Support Material:||Steel|
|Pipe Support Finish:||Hot-Dipped Galvanized|
|Backplate Dimensions:||14 in. (L) x 2 in. (W) x 2 in. (H)|
|Backplate Finish:||Hot-Dipped Galvanized|
|Hex Head Bolts Length:||Depends on Beam Selection|
|Hex Head Bolt Amount:||2|
|Hex Head Bolts Finish:||Zinc-Coated Galvanized|
|Hex Head Bolt Size:||5/8 in.|
|Split Lock Washer Amount:||2|
|Split Lock Washer Finish:||Zinc-Coated Galvanized|
|Split Lock Washer Size:||5/8 in.|
|Flat Washer Amount:||2|
|Flat Washer Finish:||Zinc-Coated Galvanized|
|Flat Washer Size:||5/8 in.|
|Nut Finish:||Zinc-Coated Galvanized|
|Nut Size:||5/8 in.|
Recommended for center-mount or twin mount. Always follow the BH-USA Overhead Boat Lift Guide. BH-USA does not recommend overhead boat lifts for boats weighing more than 12,000 lbs. Only use the full length of the pipe to connect both pipe supports.
Center-mount pipe supports are only recommended for center mount or twin mount installations, never use a center mount pipe support on a side mount installation. Never attempt to straight-line lift any more than 4500 lbs on a side mount overhead lift or straight line more than 6000 lbs on center or twin mount lifts. Only use the full length of the pipe to connect both pipe supports.
Do not attempt to use two short pieces of the drive pipe. If designing or engineering your own overhead lift you must download and read the BH-USA overhead lift guide that can be found on this page and in the tech guide section. BH-USA makes available complete engineered and rated lifts and highly encourages choosing this option over designing and engineering a lift on your own.
The above ratings of the dual pipe supports are only valid if installing or using the pipe supports in accordance with the BH-USA overhead lift guide. The Side Mount and Twin Mount ratings are based on straight line pull, by compounding the cable you will increase the rating. Rating is based PR pipe support and not pr lift. When considering the weight of your boat you must use full wet weight plus the weight of cradle .
- Center overhead beam mount
- Steel beam mount
- Hot-dipped galvanized steel
- Over 19 in. between sleeves
- Leaves room for an optional cable winder
- Mounting fasteners included