PWC Skiff Lift Piling Mount
In stock
PWC Skiff Lift Piling Mount
The PWC Skiff Lift Piling Mount is exclusive to the Coastal Series PWC Skiff Lift. The mount attaches directly to an existing dock piling. The same piling on which the lift is mounted. Made from marine-grade 6061-T6 US aluminum. This bracket is the pivotal piece of the skiff lift that allows it to rotate 180 degrees. A set of isolators is attached to the hinge to limit aluminum contact with the wood piling.
It does not include mounting fasteners.
Installation
In order to install the piling mount, it is recommended to use the two 3/4 inch mounting holes in the channel of the mount, as well as the additional mounting holes on the mount ear. Each ear has a 5/8 inch mounting hole. There is a pattern punched into the mounting holes to ensure that the bolts will stagger down the piling. Lift brackets attach to hinge brackets.
Specifications
| Material: | Aluminum |
| Designation: | 6061-T6 US |
| Dimensions: | 40 in. x 10.64 in. x 10.32 in. |
| Middle Channel Dimensions: | 40 in. x 4 in. x 1.72 in. |
| Channel Mounting Holes: | (2) 3/4 in. |
| Bracket Thickness: | 3/8 in. |
| Extruded Hinge Dimensions: | 5 in. x 4 in. x 3 in. |
| Hinge Spacing: | 10 1/2 in. |
| Hinge Mounting Holes: | (1) 3/4 in. / (2) 1/2 in. (Per Bracket) |
| Mount Ear Dimensions: | 5 in. x 4 in. x 3/8 in. |
| Mount Ear Spacing: | 13 1/2 in. |
| Ear Mounting Hole: | (1) 5/8 in. |
Product Overview
- Exclusive to the Coastal Series PWC Skiff Lift
- Mounts to existing dock piling where the lift is attached to
- Minimum 10 in. diameter dock piling
- Made from marine-grade 6061-T6 US aluminum
