Single Thread Steel Worm
The Single Thread Steel Worm is a right-hand threaded worm. Works will all BH-USA flat-plate hoists and gear plates with a 96-tooth worm gear (flat-plate boat hoists). Made from polished, hardened steel. Features a .754 in. bore. Match steel worm with a bronze 96-tooth worm gear. Featured on the BH-USA Advanced Series of flat-plate boat hoists. Single thread means it rotates one way. The teeth of the bronze 96-tooth worm gear fit into the grooves of the worm. The motor turns the drive belt and pulleys that turn the driveshaft and the worm.
Never use steel worm on a cast iron worm gear.
|Worm Type:||Steel Worm|
|Worm Material:||Polished, hardened steel|
|Thread Direction:||Right hand|
|Worm Diameter:||1 3/4 in.|
|Worm Length:||2 in.|
|Worm Bore:||.754 in.|
Disclaimer: To enable existing hoist owners to repair or replace machined items, BH-USA makes available machine parts used exclusively in the Boat Hoist USA brand flat-plate hoist.BH-USA brand machined parts should NEVER be used with any other brand flat-plate hoist or machined parts. BH-USA does not warranty any individual machine part or any other re-built/repaired flat-plate hoists. Lift-Tex Inc. does not assume ANY liability for damages to a person or property when machined parts are used in the re-build of a flat plate hoist, regardless of brand. The purchase of, and use of any machine part sold by BH-USA is at the sole risk of the user and is non-returnable, and carries no warranty. BH-USA does not guarantee any individual machined part will fix an existing problem or work as designed. It is the recommendation of BH-USA to purchase a new flat-plate hoist that has been built and tested onsite at BH-USA rather than to attempt to repair an existing hoist.
- Used on BH-USA Advanced series boat hoists
- Made from hardened, polished steel
- Measures 2 in. w x 1 3/4 in. diameter
- Features a .754 in. bore
- Right hand threaded worm