10 lb. Split Lead Cable Weight
The 10 lb. Split Lead Cable Weight measures 4 in. L x 4 in. W x 4 in. H. The weight separates in the middle. It uses (2) 5/16 in. x 1 3/4 in. galvanized GR2 hex head bolt, (2) 5/16 in. galvanized split lock washer, and (2) 5/16 in. galvanized nuts.
The weight separates in the middle and is adjustable to whatever height you want on the cable. The weight prevents the boat lift cable from bunching up by adding extra tension to the cable. It helps keep the cable straight on the pipe. It allows for adding weights to preinstalled boat lift cable.
The large hole in the center is not used for the cable but for bolting weight to aluminum beams or strap hangers. In the cable weights, cable grooves have been cast into them so that the cable weights can clamp to both sides of the cable.
Specifications
Material: | Lead |
Type: | Split |
Style: | Ball |
Size: | 4 in. L x 4 in. W x 4 in. H |
Accepts: | Up to 5/16 in. cable |
Cable Type: | Clamp (w/ shallow groove) |
Fasteners: | 2 |
Fastener Type: | Bolts |
Fastener Finish: | Hot-dipped galvanized |
Fastener Size: | 5/16 in. x 1 1/2 in. |
The large hole in the center is not used for the cable but for bolting weight to aluminum beams or strap hangers. In the cable weights, cable grooves have been cast into them so that the cable weights can clamp to both sides of the cable.
Product Guides
Product Overview
- Allows for adding cable to preinstalled boat lift cable
- Fits most boat lift cable sizes
- Splits in the middle
- Uses (2) 5/16 in. x 1 3/4 in. hex head bolts, washers, & nuts
- Adds extra tensions to boat lift cable