Weighted Compounding Bracket

$ 83.85
UPC: 091037122001
SKU: 70034

In stock

IN STOCK

Shipping Policy
×

Shipping

BH-USA has partnered with UPS to offer Ground, Next Day Air, 2nd Day Air, and 3 Day Select services to our customers. In order to ship with these methods, the order must meet UPS's requirements.

Freight

Your order will be shipped via the most cost-effective method possible. All shipping and handling charges are the responsibility of the customer. Additionally, they are responsible for any delivery issues that may hinder delivery. In such cases, extra fees can apply, such as residential delivery fees.

Click the button below to learn more about our ordering and shipping policies.

Our Shipping Partners shipping modal logos

Qty.



Weighted Compounding Bracket

The Weighted Compounding Bracket adds weight to each side of the boat lift cable under the compounded pulley. Hot dipped galvanized steel. Easy to install. Designed to safely add cable weights to a lift that has compounded cables. Proper use of the bracket will allow the cable to travel through the block with no obstructions that could damage the cable.

The flat compounding bracket measures 2 1/2 in. L x 3/8 in. W x 8 in. H. The shackle mounts at one end, the 10 lb. split lead weight in the middle, and the open hole is for a block (sold separately).

The 5/8 in. 3.25 Ton Galvanized Screw Pin Shackle is hot dipped galvanized per ASTM A153 standards. Features a heat-treated screw pin for securement. Manufactured out of forged steel then galvanized. Designed frequent removal. Permanently marked with size and working load limit (WLL), in tons. Designed to lift up to 3.25 tons of weight.

The 10 lb. Split Lead Cable Weight measures 3 3/4 in. wide and 3 in. height. Mounting fasteners included. Separates in the middle and is adjustable to whatever height you want on the cable. The split design gives the ability to tighten the weight to a fixed position on the cable. The cable weights help prevent the cable from bunching up by adding extra tension, keeping it straight on the pipe.

Specifications

Material: Lead
Type: Split
Style: Ball
Size: 4 in. L x 4 in. W x 4 in. H
Accepts: Up to 5/16 in. cable
Cable Type: Clamp (w/ shallow groove)
Fasteners: 2
Fastener Type: Bolts
Fastener Finish: Hot-dipped galvanized
Fastener Size: 5/16 in. x 1 1/2 in.
Type Anchor Shackle
Pin Style Screw Pin
Working Load Limit 6,500 lbs
Width Between Eyes 1 3/8 in.
Pin Dia. 5/8 in.
Body Size 1 5/8 in.
Body Material Forged Steel
Finish Galvanized
Pin Material Forged Steel
Raised Stamp (WLL) 3.25 T
Flat Bar Dimensions: 2 1/2 in. L x 3/8 in. W x 8 in. H
Mounting Holes: Drill punched

Product Overview

  • Hot-dipped galvanized
  • Drill punched mounting holes
  • Includes 10 lb. split lead weight installed in the middle
  • Shackle mounting to one end
  • Accepts up to 5/116 in. cable
  • Adds weight to either side of the cable
  • Easy to install

Reviews