12K Galvanized Four Post Flat-Plate Top Beam Set

0 Reviews
$3,334.36
SKU: 97150
UPC: 602573971505

Currently Unavailable

Qty.



12K Galvanized Four Post Flat-Plate Top Beam Set

The 12K Galvanized Four Post Flat-Plate Top Beam Set is used on the 10K & 12K galvanized four-post pile mount boat lifts. The WF beam includes pipe supports, drive pipe sleeve support, 1/4 in. grease fittings, and dead man clamps installed. Includes powder coated 4,000 lb. gear plate assembly, (2) 1 hp painted wired boat lift motors, and hoist covers.

Beam Capacity: Used On: Post Size:
4K 6K & 8K 4
6K 10K & 12K 4
Specifications

Capacity / Per Beam: 6,000 lbs.
Top Beam Dimensions: 13 ft. x 6 in. Web x 4 in. Flange
Top Beam Material: Steel WF Beam
Drive Pipe Support: Dual
Drive Pipe Type: Sch. 40
Drive Pipe Finish: Hot-dipped Galvanized
Drive Pipe OD: 2 3/8 in.
Drive Pipe ID: 2 in.
Pipe Bearings: Galvanized Support
Bearing Maintenance: Greaseable
Grease Fitting Size: 1/4 in.
Grease Fitting Style: Press-In
Dead Man Brackets: Pre-Installed
Cable Winders: Not Included
Welded: Yes
Rigging: 5/16 in. Stainless Steel Boat Lift Cable
Drive Pipe: 2 in. ID Sch 40 HDG
Compound Tabs: Welded Tabs
Cable Length: 31 ft.
Compounding: 4 in. Blocks
Shackles: 5/8 in. 3.25 Top Shackles (Attaches Block to Cradle)
GPA Rated Capacity: 4,000 lbs.
GPA Tested Capacity: Straight line
GPA Dimensions: 2 ft. x 1 ft.
GPA Bull Gear Ratio: 96:1
GPA Back Plate Bearing: Bronze Composite
GPA 96 Tooth Gear Material: Cast Iron
GPA Worm Material: Hardened Bronze
GPA Hoist Pulley Size: 10 in.
GPA Hoist Pulley Material: Zinc die-cast
GPA Drive Belt Size: 34 in.
GPA Drive Belt Type: AX-34 cogged belt
GPA Weight: 34-47 lbs.
GPA Warranty: Lifetime
Motor Type: 56 Frame (Clawfoot)
Motor Brand: Elite
Motor Size: 1 HP
Motor Finish: Painted Black
Motor Max Run Time: 15 minutes
Motor Voltage: 110v
Motor Style: TENV
Motor Shaft Diameter: 5/8 in.
Boat Lift Switch Type: Maintained
Control Cable Length: 16 ft. / 45 ft.
Protection Type: GFCI
GFCI Type: In-Line

BH-USA Galvanized 4 post lifts are individually crated and can only be shipped via motor freight. Product shipped motor freight is the purchaser’s responsibility to arrange for a delivery address that is accessible and has a fork truck available. If a Fork Truck is not available you can arrange to hand unload the crate. BH-USA will request a call from the freight company to the purchaser to help facilitate this arrangement. Missed deliveries can incur extra freight charges that will be the purchaser’s responsibility. All galvanized top beams come with the welded dead-man tab for compounding. The 12,000 lb. rating is based on the use of both top beams mounted to the top of pilings and compounding the overall lift. The 4 post lifts are engineered to work with BH-USA rated Cradles only or use with BH-USA polyester rated slings. Custom cradles or plat-forms are used at the end-users risk and BH-USA cannot be held liable for failure caused by non-BHUSA equipment or use outside intended design.

Product Overview

  • Hot-dipped galvanized steel
  • Welded "dead man" compounding tabs
  • 6,000 lbs. Capacity per Beam
  • Strong, heavy-duty design
  • 13 ft. x 6 in. web x 4 in. flange structural beam
  • 2 3/8 in. OD / 2 in. ID drive pipe
  • Comes with 2 top beams

Reviews