20,000 lb. Aluminum Pontoon Boat Cradle

0 Reviews
$3,837.07 - $4,884.76
Clear

×

Residential Deliveries

Free Shipping via UPS SurePost is an economy, residential, ground service. This service combines the consistency and reliability of the UPS Ground network with final delivery typically provided by the U.S. Postal Service. If you wish for your order to go through UPS for delivery, select UPS Ground at checkout.

Freight companies could charge an additional fee on top of the original freight charge if delivering to a residence. Each freight carrier has its own definitions for residential delivery.

Freight

BH-USA will make every effort possible to find the most cost-effective freight shipping method for your order. The customer is financially responsible for all shipping and handling charges of their order. BH-USA will select from one of its preferred freight carriers to ship your order unless otherwise specified in writing.

The customer must work with the freight carrier for delivery. Two options; pick up at the terminal or deliver to a location. Freight carriers will not unload and drop freight at the door like UPS or USPS. The freight carrier will make every effort to arrange delivery with the homeowner. If the customer is uncompliant with the freight carrier, the order will be returned to BH-USA. The purchaser will be charged for all freight costs and an additional 20% restock fee.

BH-USA is in no way responsible for any type of issues with the delivery of freight such as gates, neighborhoods that do not allow large trucks, inaccessible roads, homeowner being out of town, or any other issue that might hinder the delivery of the freight.

BH-USA cannot promise any special requests from a customer regarding freight, this must be handled between you and the freight company. If you are concerned that a large truck cannot deliver to your address we suggest not ordering this item until you have made arrangements to have it shipped to a commercial address.

Freight Quotes

We are here to help if you need a freight quote. BH-USA will quote based on information supplied by the customer at the time of the quote.

BH-USA will not be held responsible for this quote if unforeseen charges are applied. Such charges could be a residential delivery charge, drop gate, missed delivery attempts, or other types of charges. If this happens, BH-USA will bill the customer for the additional charges with the payment method used to place the order. BH-USA reserves the right to run the credit card provided again for the additional freight charges.

Due to the fluctuation of fuel costs, all quotes are considered an estimate. Charges could be higher than previously quoted on the order. The customer is responsible for the cost difference.

Receiving a Freight Shipment

Signing the delivery ticket as received is a contractual agreement transferring ownership of the shipment from BH-USA to the signee.

BEFORE you sign the delivery ticket make sure delivery is complete and no visible damages are present. If items are missing or damaged either notate this on the delivery ticket. Have the delivery driver sign the notation or refuse the shipment.

If the shipment is delivered and signed it is complete delivery. Then it is understood by BH-USA that the shipment arrived complete with no damage or issues.

Filing a Claim

BH-USA will help with the claim process. It is the responsibility of the customer to file the claim with the shipping carrier. BH-USA is not responsible for replacing any missing item that was lost in transit and signed as received by the customer. Once a claim is approved by the shipping carrier, BH-USA will send a replacement item.

Please note that most shipping carriers will not approve a claim if the customer has signed received it in full. BH-USA is not responsible if an unauthorized person signed for the shipment with missing or incomplete items.

Incorrect Order Shipped

If BH-USA is at fault for shipping the wrong item or amount, we will reship the item(s) at our own expense. The correction will process like other orders and follow standard BH-USA shipping procedures.

Claims for shortages or unseen damages MUST be made within 10 days of receipt of shipment.

BH-USA will arrange the wrong item(s) return at our expense. If the wrong item is not returned within 10 days of the claim, the customer will be billed for the item.

BH-USA reserves the right to select a carrier for any shipment that qualifies for prepaid freight. BH-USA will not prepay overnight, next-day air, second-day air or priority shipments regardless of the situation.

Call Tags

Only one call tag issued when picking up items sent by mistake. The customer will be billed for additional call tags. Returns or warranties will not be issued a call tag.

Labor & Time Lost

BH-USA is not responsible for any labor or time lost by a company due to faulty equipment, incorrect shipments, lost shipments, backorders, or other issues that might be caused by BH-USA or the freight carriers.

Qty.



20,000 lb. Aluminum Pontoon Boat Cradle

The 20,000 lb. Aluminum Pontoon Boat Cradle is designed to cradle pontoon boats up to 20,000 lbs. Made from marine grade 6061-T6 US aluminum. Features no welds.  Choice of aluminum bunks or setup for wood bunks. All stainless steel fasteners are used on the aluminum cradle.

Wood bunks not included.

10 in. Aluminum Cradle Beam

The 8 in. Aluminum Cradle Beam is an extruded aluminum I-beam with sheave housing mounted on the ends of the flange. Sheave housings accommodate 4 in. aluminum sheaves with a bronze bushing. Using an axle bolt with washers and a nut holds sheave in place.

Made from marine-grade, extruded 6o61-T6 US aluminum. No weld construction. The sheave housings include the cradle beam mounting fasteners. Measures either 14 ft. L or 16 ft. L x 10 in. web x 6 in. flange. .250 in. web thickness. .410 in. flange thickness. 6.307 lbs. per linear ft.

8 in. Aluminum Cradle Bunk

The 8 in. Aluminum Cradle Bunk mounts to an aluminum cradle beam and is where the hull of the boat rests on a boat cradle. Features a black rubber top mounted on the aluminum base. The rubber top is resistant to marking the boat’s hull when docking. Designed with a 19-degree angle that allows to evenly distribute the boat’s weight and provide a snug fit in the boat cradle.

Made from marine-grade 6061-T6 US aluminum. No worries about rusting or wood bunk rot.

Aluminum Guidepost Stanchion Kit

The Aluminum Guidepost Stanchion Kit is designed to install aluminum boat cradles and aluminum boat lifts. Made from 6061-T6 US aluminum. The kit features a “no-weld” design. Fits all BH-USA aluminum boat cradles and aluminum boat lifts. Easy to install on preexisting boat cradle beams. Allows 2 in. ID PVC pipe to slide over the stanchion.

Includes all stainless steel mounting fasteners.
Optional Capped White PVC Guidepost and Guidepost Bumpers are sold separately.

Kits Includes:

Guidepost Stanchion
Guidepost Stanchion Backup Plate
1/2 in. x (Length Varies) Stainless Steel Hex Head Bolts
1/2 in. Stainless Steel Split Lock Washers
1/2 in. Stainless Steel Nuts

The number of fasteners varies by kit size option.

Installation

The fastener bolts go through the stanchion mounting holes through the backplate and are secured with a lock washer and nut. The cradle beam being in the middle allows the stanchion to “clamp” tight onto the cradle beam.  Then use an optional guidepost to slide on top of the stanchion.

Specifications

Material: Aluminum
Type: 6061-T6 US
Style: Marine-grade extruded
Beam Type: Structural
Web Size (A): 10 in.
Flange Size (B): 6 in.
Web Thickness (C): .250 in.
Flange Thickness: .410 in.
Beam Wt./Lin Ft.: 8.646 lbs. (per ft.)
Sheave Housing Dimensions: 10 in. web x 6 in. flange
Accepts: 4 in. aluminum sheave
Material: Aluminum
Sheave Bolt Bore: 3/4 in.
Fasteners Material: 316 stainless steel
Bolt Type: Hex head
Bolt Amount: 4
Bolt Size: 1/2 in. x 2 1/2 in.
Washer Type: Lock
Washer Amount: 4
Washer Size: 1/2 in.
Nut Amount: 4
Nut Size: 1/2 in.
Bunk Size: 10 in.
Dimensions: 28 in. L x 1 15/16 in.
Inner Diameter: 1 3/16 in.
Material: Aluminum
Thickness: 3/8 in.
Accepts: 2 in. ID PVC Pipe
Backup Plate Dimensions: 14 in. L x 2 in. (per flange)
Mounting Holes: 2 (through the pipe)
Hole Size: 9/16 in.
Measurement Between Holes: 11 in. (center-to-center)
Bolt Type: Hex head
Bolt Material: Stainless steel
Bolt Size: 1/2 in. x 10 in.
Washer Type: Lock
Washer Material: Stainless steel
Washer Size: 1/2 in.
Nut Material: Stainless steel
Nut Size: 1/2 in.
Cradle Bunk Material: Aluminum
Bunk Material Style: : 6061-T6 US
Bunk Type: Cradle
Length: Varies
Padding Material: Rubber
Padding Design: Non-marking
Padding Color: Black
Bunk Height: 8 in.
Bunk Angle: 19 degrees
8 in. Cradle Bunk Weight: 2.898 lbs. / linear ft.

All boat cradles, cradle beams, and boat lift ship freight. It is the responsibility of the purchaser to unload the freight from the delivery truck. The purchaser must be present during delivery. For more questions, visit our shipping terms and conditions.

Drilling into the aluminum structural beam compromises the integrity of the aluminum structural beam.

Product Overview

  • Designed for pontoon boats up to 20,000 lbs.
  • Made from marine-grade 6061-T6 US aluminum
  • Features a no weld design
  • Includes all stainless steel fasteners
  • Includes stanchions, guideposts, and guidepost bumpers
  • Comes with either aluminum bunks or a wood bunk mounting kit
  • Wood bunks not included

Reviews