6K-8K Pile Mount Flat-Plate Hardware Kit
The 6K-8K Pile Mount Flat-Plate Hardware Kit includes the hardware to mount a flat-plate hoist on an aluminum 4 post pile mount boat lift. The Aluminum Pile Mount Top Beam Bracket is a safety securement bracket for aluminum pile mount boat lifts. The bracket slides onto the bottom flange of the aluminum top beam. The top beam rests on the top of the dock piling. The bracket installs on the dock piling as an added securement bracket. The bracket helps keep the top beam from moving side to side or being lifted during bad weather.
Features a no-weld design. Uses stainless steel fasteners with PVC isolators so the aluminum bracket does not touch the dock piling wood. Available in (3) sizes for different size pile mount boat lifts. Secures top beams up to 7 in. channel. The bracket pieces mounting on the aluminum top beam are adjustable making it easier to install. Made from 6061-T6 US aluminum.
The Flat-Plate Pipe Reduction Sleeve changes the drive pipe output from 2 in. ID to a standard 1 1/2 in. ID driveshaft. Most commonly used on pile mount boat lifts. Features a 2.067 in. inside diameter. Schedule 40 wall thickness. Made from marine-grade 6061-T6 US aluminum. Predrilled to fit the flat-plate hoist drive pipe.
Dock piling mounting fasteners not included.
Includes:
(4) Aluminum Pile Mount Top Beam Bracket
(2) Aluminum Flat-Plate Hoist Mount
(1) Aluminum Lift Hoist Mount Fastener Pack
(1) Four Post Limit Switch Bracket
(2) Flat-Plate Pipe Reduction Sleeve
(1) Four Post Limit Switch Fastener Pack
(8) Grey PVC Isolators – 2 in. x 12 in.
(1) 6K -8K Aluminum Cradle Bracket Bolts
Specifications
Clamp Material: | Aluminum |
Type: | 6061-T6 US |
Size Limitations: | > 7 3/4 in. |
Clamp Amount: | 4 |
Hoist Mount: | Flat-plate |
Material: | Aluminum |
Type: | 6061-T6 US |
Mount Amount: | 2 |
Limit Switch Type: | 4 piling post |
Limit Switch Amount: | 1 |
Pipe Reducer Sleeve Material: | Aluminum |
Sleeve Type: | 6061-T6 US |
Sleeve Amount: | 2 |
Bracket Bolt Material: | Stainless steel |
Bolt Size: | 5/8 in. x 3 in. |
Bolt Amount: | 4 |
Bracket Washer Size: | 5/8 in. |
Washer Material: | Stainless steel |
Washer Amount: | 4 |
Nut Size: | 5/8 in. |
Nut Material: | Stainless steel |
Nut Amount: | 4 |
Hoist Mount Bolt Type: | Tap |
Bolt Material: | Stainless steel |
Bolt Size: | 1/2 in. x 1 3/4 in. |
Bolt Amount: | 12 |
Washer Size: | 1/2 in. |
Washer Material: | Stainless steel |
Washer Amount: | 12 |
Mount Nut Size: | 1/2 in. |
Nut Material: | Stainless steel |
Nut Amount: | 12 |
Limit Bracket Bolt Type: | Tap |
Bolt Material: | Stainless steel |
Bolt Size: | 5/16 in. x 1 1/4 in. |
Bolt Amount: | 2 |
Washer Size: | 5/16 in. |
Washer Material: | Stainless steel |
Washer Amount: | 2 |
Mount Nut Size: | 5/16 in. |
Nut Material: | Stainless steel |
Nut Amount: | 2 |
Product Overview
- Marine-grade 6061-T6 US aluminum brackets, sleeves, & hoist brackets
- 1/2 in. & 5 1/6 in. stainless steel fasteners
- Fits 4 post pile mount aluminum boat lifts
- Designed to mount a flat-plate hoist on the aluminum beam