8K Galvanized Four Post Flat-Plate Top Beam Set
8K Galvanized Four Post Flat-Plate Top Beam Set
The 8K Galvanized Four Post Flat-Plate Top Beam Set includes (2) top beams with flat-plate hoists. Weight capacity of 8,000 lbs. Made from hot-dipped galvanized structural beams with dead man brackets welded into the beams.
Features (2) Elite 1 HP 110v painted wired boat lift motors. Includes Bremas maintained switch and in-line GFCI. 16 ft. control cable for one motor and the other motor has 45 ft. of control cable. Includes (2) powder-coated 4,000 lb. standard gear plate assembly.
Does not include boat cradle or boat slings.
Top Beam Set Includes:
(2) Elite 1 HP 110v painted boat lift motor w/ Bremas maintained switch & in-line GFCI
(2) 4,000 lb. standard powder-coated gear plate assembly
(4) 15 ft. x 5/16 in. galvanized 7 x 19 aircraft cable
(2) Front and Back white hoist covers
(2) 12K 13 ft. galvanized top beams w/ dead man brackets
(1) 6K-8K galvanized fastener kit (1/2 in. & 5/16 in. fasteners)
| Beam Capacity: | Used On: | Post Size: |
| 4K | 6K & 8K | 4 |
| 6K | 10K & 12K | 4 |
Specifications
| Capacity / Per Beam: | 6,000 lbs. |
| Top Beam Dimensions: | 13 ft. x 6 in. Web x 4 in. Flange |
| Top Beam Material: | Steel WF Beam |
| Drive Pipe Support: | Dual |
| Drive Pipe Type: | Sch. 40 |
| Drive Pipe Finish: | Hot-dipped galvanized |
| Drive Pipe OD: | 2 3/8 in. |
| Drive Pipe ID: | 2 in. |
| Pipe Bearings: | Galvanized support |
| Bearing Maintenance: | Greaseable |
| Grease Fitting Size: | 1/4 in. |
| Grease Fitting Style: | Press-In |
| Dead Man Brackets: | Pre-Installed |
| Cable Winders: | Not Included |
| Welded: | Yes |
| Rigging: | 5/16 in. Stainless Steel Boat Lift Cable |
| Drive Pipe: | 2 3/8 in. OD (2 in. ID) Sch 40 HDG |
| Compound Tabs: | Welded Tabs |
| Cable Length: | 31 ft. |
| Compounding: | 4 in. Blocks |
| Shackles: | 5/8 in. 3.25 Top Shackles (Attaches Block to Cradle) |
| GPA Rated Capacity: | 4,000 lbs. |
| GPA Tested Capacity: | Straight line |
| GPA Dimensions: | 2 ft. x 1 ft. |
| GPA Bull Gear Ratio: | 96:1 |
| GPA Back Plate Bearing: | Bronze composite |
| GPA 96 Tooth Gear Material: | Cast Iron |
| GPA Worm Material: | Hardened bronze |
| GPA Hoist Pulley Size: | 10 in. |
| GPA Hoist Pulley Material: | Zinc die-cast |
| GPA Drive Belt Size: | 34 in. |
| GPA Drive Belt Type: | AX-34 cogged belt |
| GPA Weight: | 34-47 lbs. |
| GPA Warranty: | Lifetime |
| Motor Type: | 56 Frame (clawfoot) |
| Motor Brand: | Elite |
| Motor Size: | 1 HP |
| Motor Finish: | Painted black |
| Motor Max Run Time: | 15 minutes |
| Motor Voltage: | 110v |
| Motor Style: | TENV |
| Motor Shaft Diameter: | 5/8 in. |
| Boat Lift Switch Type: | Maintained |
| Control Cable Length: | 16 ft. / 45 ft. |
| Protection Type: | GFCI |
| GFCI Type: | In-Line |
BH-USA Galvanized 4 post lifts are individually crated and can only be shipped via motor freight. Product shipped motor freight is the purchaser’s responsibility to arrange for a delivery address that is accessible and has a fork truck available. If a Fork Truck is not available you can arrange to hand unload the crate. BH-USA will request a call from the freight company to the purchaser to help facilitate this arrangement. Missed deliveries can incur extra freight charges that will be the purchaser’s responsibility. All galvanized top beams come with the welded dead-man tab for compounding. The 12,000 lb. rating is based on the use of both top beams mounted to the top of pilings and compounding the overall lift. The 4 post lifts are engineered to work with BH-USA rated Cradles only or use with BH-USA polyester rated slings. Custom cradles or plat-forms are used at the end-users risk and BH-USA cannot be held liable for failure caused by non-BHUSA equipment or use outside intended design.
Product Overview
- Made from hot-dipped galvanized steel
- (2) 13 ft. 12K top beams included
- Includes (2) BH-40 flat-plate hoists
- 6,000 lbs. per top beam capacity
- Includes 12 ft. 9 in. x 2 3/8 in. OD galvanized drive pipe
- Comes with both front and back white hoist covers
