Gulf Breeze Overhead A-Drive Top Beam Set
$ 5,838.90
SKU: 93179
UPC: 091037930286
Special Order
Stock Policy
Shipping Policy
Return Policy
Gulf Breeze Overhead A-Drive Top Beam Set
Gulf Breeze Overhead Boat Lifts are mounted on parallel wood stringers that run parallel to the slip. It is engineered and rated to handle boats up to 12,000 pounds. Powered by twin enclosed A-Drive hoists, this boat lift can lift up to 2 feet per minute. An all-aluminum no-weld boat cradle and aluminum bunks come standard with the Gulf Breeze Overhead Boat Lift. This lift is equipped with stainless steel hardware and rigging, and it is ready to be installed.
The all aluminum no weld brackets can be adjusted from 6 inches wide to 12 inches wide, which makes them ideal for supporting structures with triple wood stringers and beams from 6 inches to 12 inches tall. BH-USA aluminum lift bearing blocks with bronze bearings on all moving surfaces guarantee a quiet lift.
Gulf Breeze Overhead Boat Lifts are made in the USA from USA made 6061-T6 marine grade aluminum. They were designed to suit construction methods typically found around the Florida Panhandle, Gulf Breeze and Mobile Bay areas, but have now gained popularity in almost every East Coast and Gulf Coast state.
Does not include wood joist mounting fasteners. Includes (2) top beams with A-Drive’s wired to them.
Specifications
| Fits Drive Pipe Size: | 1.5 in. |
| Drive Pipe Type: | Schedule 40 |
| Drive Pipe Finish: | Electro-galvanized |
| Cable Type: | 7 x 19 aircraft cable |
| Cable Material: | Stainless steel |
| Cable Thickness: | 5/16 in. |
| Cable Line: | 2 part (compounded) |
| Cable Length: | 33 ft. |
| Cable Quantity: | 4 |
| Cable Winder Direction: | Single |
| Cable Winder Type: | Solid |
| Cable Winder Quantity: | 4 |
| Motor Size: | 1 HP |
| Motor Finish: | Stainless steel |
| Motor Type: | C-Face |
| Motor Quantity: | 2 |
| Motor Control Cable Length: | 16 ft. & 45 ft. |
| Material: | Aluminum |
| Material Type: | 6061 T-6 US |
| Material Thickness: | 1/4 in. |
| Distance between Bearings: | 19 in. |
| Bracket Height above Bearing: | 14 in. |
| Wood Joist Mounting Holes: | 4 (per flange) |
| Mounting Hole Size: | 3/4 in. |
| Max. Stinger Width: | 5 1/2 in. |
| Bearing Block Dimension: | 4 7/8 in. x 5 3/4 in. x 1 1/2 in. |
| Housing Material: | 6061-T6 US Aluminum |
| Press In Bushing Type: | Bronze |
| Bushing ID: | 1 7/8 in. |
| Bearing Surface | 1 5/8 in. |
| Mounting Hole | 9/16 in. |
| Grease Fitting Size: | 1/4 in. |
| Gearbox Type: | Direct drive |
| Gearbox Weight: | 28.35 lbs. |
| Warranty: | 5 years |
| Gear Type: | 40:75 configuration |
| Actual Ratio: | 450:1 |
| Material: | Aluminum |
| Lubrication: | Specially blended gear grease |
| Lubrication Application: | Permanently sealed in the gearbox |
| Motor Flange to Driveshaft Flange Offset: | 1.22 in. |
| Overall Dimensions: | 11.16 in. L x 7.21 in. W x 13.23 in. H |
| Output Shaft Size: | 1 1/4 in. |
| Input Motor Shaft Size: | 5/8 in. |
| Motor Shaft to Drive Pipe Shaft: | 6.59 in. |
| Drive Pipe Mounting Bolt Size: | (4) .55 in. |
| Drive Pipe Bolt Mount Hole to Bolt Mount Hole: | 4.59 in. |
| Driveshaft Gearbox Dimensions: | 8.07 in. L x 5.04 in. W x 6.77 H |
| Motor Mounting Type: | C-Face |
| Motor Mounting Bolt Size: | (4) 7/16 in. |
| Motor Bolt Mount Hole to Bolt Mount Hole: | 4.15 in. |
| Motor Gearbox Dimensions: | 4.78 L x 3.94 in. W x 3.37 in. H |
| 1 HP Motor A-Drive Output Torque: | 4,932 lbs./in. |
| Maximum Run Time: | 15 minutes |
| Horsepower: | 1 HP |
| Mounting Type: | C |
| RPM: | 1725 |
| Service Factor: | 1.15 |
| SFA: | 17.5 (115v) |
| Phase: | 1 |
| Amps: | 15.6 |
| Herz: | 60 |
| AMB: | 40°C |
| Frame: | 56C |
| HSG: | TENV |
| Code: | H |
| Insulation: | F |
| Shaft Diameter: | 5/8 in. |
| Max Amps: | 20 |
| Compliance: | UL, NEMA, CE, SA |
| VAC: | 120-240 |
| Box Color: | Gray |
| Handle Color: | Red |
| Switch Type: | Maintained (Lock-On) |
| Housing Material: | Plastic |
| Plug Type: | 3-US 110 V Standard |
| Plug Cord Length: | 6 in. |
| GFCI to Switch Cord Length: | 6 ft. |
| GFCI: | 7 in. x 2 1/2 in. x 1 in. |
| Color: | Black |
| Class: | A-Rainproof |
| Catalog Number: | 303385214 |
| AMP: | 15 |
| Hz: | 60 |
| Watt: | 1875 |
| Volt: | 125 |
| Reset Type: | Automatic |
| Cord Diameter Range: | .28 – .65 |
All BH-USA boat lifts are individually crated and ship via motor freight. Items shipped freight are the purchasers’ responsibility to arrange a delivery address that is accessible to the freight company and that a fork truck is available to unload the freight. If a fork truck is not available, the customer will have to unload the crate by hand. BH-USA will request a call from the freight company to the customer to help facilitate the delivery. Missed deliveries can add extra freight charges that will be the purchasers’ responsibility. All boat lifts come with 33 ft. cable drops for straight-line boat lifts. You will need to cut the cable to fit your configuration.
Product Overview
- 12,000 lb lifting capacity
- 6061-T6 USA aluminum
- Lightweight, no weld and easy to install
- Uses (2) A-Drive direct drive hoists
- Comes standard with Stainless Steel Elite Motors
- All Stainless rigging and fasteners
- Ships complete ready to install in single crate
- Top beams only no cradles
