Coastal Series A-Drive PWC Skiff Lift Kit
$ 4,136.27
SKU: 15189
UPC: 602573204757
Only 1 left in stock
Special Order
Stock Policy
Shipping Policy
Return Policy
Coastal Series A-Drive PWC Skiff Lift Kit
The Coastal Series A-Drive PWC Skiff Lift comes with everything except bunks and bunk mounting angles. Designed as the only PWC Skiff pile mount boat lift on the market that stays completely out of the water when it is raised.
Features all-aluminum construction and stainless steel fasteners. Rotates 180 degrees while in the air. Bringing the PWC or skiff boats fully out of the water allows for easier maintenance and storage. It travels 3 ft. per minute when raising and lowering the lift. It has 8 1/2 ft. (102 in.) of travel area. 1,500 lb. lifting capacity. Fits up to 7 ft. wide jet skis or skiff boats. Maintenance-free design. Easy to install. Mounts to pre-existing dock pilings.
Part Identification
| Item No. | Quantity | Description |
| 1 | 1 | Piling mounts |
| 2 | 5 | .812 ID x 1.469 OD x .125 THK Lubricant-filled nylon washer |
| 3 | 1 | Mast |
| 4 | 2 | Lift arm |
| 5 | 1 | 1/2 in. x 2 in. 13 thread stainless steel hex head bolts |
| 6 | 7 | 1/2 in. stainless steel washers |
| 7 | 4 | 1/2 in. x 6 in. 13 thread stainless steel hex head bolts |
| 8 | 4 | 1/2 in. stainless steel lock washer |
| 9 | 1 | Swing stop pin assembly |
| 10 | 2 | Aluminum guidepost stanchions |
| 11 | 2 | PVC guideposts |
| 12 | 2 | Guidepost bumpers |
| 13 | 1 | 5/8 in. x 6 in. 11 thread stainless steel hex head bolts |
| 14 | 1 | Cable roller |
| 16 | 1 | 1 HP wired boat lift motor |
| 17 | 1 | Lift housing assembly |
| 18 | 1 | 1/4 in. stainless steel cable w/ swaged loop |
| 19 | 4 | 1/2 in. stainless steel nut |
| 20 | 4 | 5/8 in. nyloc nut |
| 21 | 1 | Roller housing assembly |
| 22 | 1 | 1/2 in. stainless steel nyloc nut |
| 24 | 3 | 5/8 in. x 5 in. 11 thread stainless steel hex cap screw |
| 25 | 3 | 5/8 in. type A stainless steel flat washer |
| 26 | 16 | 1/2 in. x 3 1/2 in. 13 thread stainless steel hex cap screw |
| 27 | 16 | 1/2 in. stainless steel washer |
| 28 | 16 | 1/2 in. stainless steel Nuts |
Specifications
General Specifications |
|||
|---|---|---|---|
| Lift Rating: | 1,500 lbs. | Lift Speed: | 3 ft. / min. |
| Travel Distance: | 8.5 ft. (102 in.) | Hoist Type: | A-Drive (Direct-Drive) |
| Gearbox: | 100:1 | Motor: | 1 HP |
| Piling Recommendation: | 10 in. (Dia) | Min. Above Dock: | 42 in. |
| Fasteners: | 316 Stainless Steel | Lift Material: | Aluminum |
| Rotation: | 180º | Electrical Voltage: | 110v |
| Amps: | 16 | Material Type: | 6061-T6 US |
Housing & Cable Specifications |
|||
| Main Housing Material: | Aluminum | Mast Length: | 13 ft. (156 in.) |
| Cable Type: | 7 x 19 Aircraft | Mast Height: | 14 ft. (168 in.) |
| Cable Thickness: | 0.25 in. (1/4) | Cable Length: | 23 ft. (276 in.) |
| Cable End: | Swaged (One End) | Cable Material: | 316 Stainless Steel |
| Spool Dimensions: | 5 in. x 5 1/8 in. | Travel Speed:: | 4 1/2 ft. / minute (1 HP) |
| Spool Holds: | 112 in. (1/4 in. cable) | Mounting Holes: | 3 |
| Mounting Hole Size: | 1/2 in. | Mounting Pattern: | Triangle |
| Mounting Slots: | 2 | Slot Size: | 1 1/16 in. x 9/16 in. |
| Mounting Holes: | 1 | Round Size: | 9/16 in. x 9/16 in. |
| Cable Roller: | One | Roller Color: | Black |
| Roller Material: | Acetron GP | Roller Dimensions: | 4 in. x 2 in. x 2 in. |
| Bracket Fastener Size: | 1/2 in. | Fastener Material: | Stainless Steel |
| Bolt: | Hex Head | Bolt Size: | 1/2 in. x 5 1/2 in. |
| Bolt Amount: | 8 | Next Bolt: | Hex Head |
| Bolt Size: | 1/2 in. x 4 1/2 in. | Bolt Amount: | 16 |
| Nut Size: | 1/2 in. | Nut Amount: | 24 |
| Washer Type: | Lock | Washer Size: | 1/2 in. |
| Washer Amount: | 16 | Washer Type: | Flat |
| Washer Size: | 1/2 in. | Washer Amount: | 16 |
Stanchion & Guidepost Specifications |
|||
| Stanchion Size: | 6 in. | Stanchion Dimensions: | 24 in. L x 1 15/16 in. |
| Inner Diameter: | 1 3/16 in. | Material: | Aluminum |
| Thickness: | 3/8 in. | Accepts: | 2 in. ID PVC pipe |
| Backup Plate Dimensions: | 14 in. L x 2 in. (per flange) | Mounting Holes: | 2 (through the pipe) |
| Hole Size: | 9/16 in. | Measurement Between Holes: | 7 in. (center-to-center) |
| Bolt Type: | Hex head | Bolt Material: | Stainless steel |
| Bolt Size: | 1/2 in. x 6 in. | Washer Type: | Lock |
| Washer Material: | Stainless steel | Washer Size: | 1/2 in. |
| Nut Material: | Stainless steel | Nut Size: | 1/2 in. |
| Guidepost Length: | 60 in. | Guidepost Material: | PVC |
| Guidepost Color: | White | Compound: | PVC 1120 Type 1 Sch. 40 |
| Rating: | ASTM D 2665 | PSI: | @ 23° C |
| Thickness: | 3/16 in. | Pipe Width (OD): | 2 3/8 in. |
| Top Cap Modifications: | Drilled | Pipe Width (ID): | 2 in. |
| Hole Size: | 1/4 in. | Fits: | BH-USA guidepost stanchions |
| Guidepost Cover Color: | Black | Cover Length: | 48 in. |
| Inner Material: | Split Foam | Cover Material: | Nylon |
| Foam Thickness: | 1/2 in. | Fits: | 2 3/8 in. OD PVC Pipe |
Piling Mounting Bracket Specifications |
|||
| Pile Mount Bracket Material: | Aluminum | Designation: | 6061-T6 US |
| Dimensions: | 40 in. x 10.64 in. x 10.32 in. | Middle Channel Dimensions: | 40 in. x 4 in. x 1.72 in. |
| Channel Mounting Holes: | (2) 3/4 in. | Bracket Thickness: | 3/8 in. |
| Extruded Hinge Dimensions: | 5 in. x 4 in. x 3 in. | Hinge Spacing: | 10 1/2 in. |
| Hinge Mounting Holes: | (1) 3/4 in. / (2) 1/2 in. (Per Bracket) | Mount Ear Dimensions: | 5 in. x 4 in. x 3/8 in. |
| Mount Ear Spacing: | 13 1/2 in. | Ear Mounting Hole: | (1) 5/8 in. |
Gearbox Specifications |
|||
| Gear Ratio: | 1:100 | Material: | Aluminum |
| Drive Pipe Output Shaft: | 2 3/8 in. OD (2 in. ID) | Motor Output Shaft: | 1.125 in. |
| Lubrication Type: | Specially Blended | Bearings: | Bronze |
Motor Specifications |
|||
| Weight: | 28.60 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.75 in. | Product Width: | 6.50 in. |
| Product Height: | 9.0 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93048 | Retail SKU: | 93091 |
Nameplate Specifications |
|||
| HP: | 1 | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 15.6 (115v) / 7.8 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 17.5 (115v) / 8.75 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | H |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 9.0 in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
| Capacitor SKU #: | BH02246 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.75 in. |
Rotary Cam Specifications |
|||
| Manufacturer: | Bremas America | Material: | Plastic |
| Max Amps: | 20 | Max. HP: | 1.5 HP |
| VAC: | 120-240 | Compliance: | UL, NEMA, CE, SA |
| Box Weight: | 1.15 lbs. | Type: | Rotary CAM |
| Switch Length: | 3.5 in. | Switch Width: | 4.5 in. |
| Switch Height: | 4.5 in. | Model: | CY0178068SR2/8009SRX |
| BH-USA SKU: | BH09015 | Box Color: | Gray |
| Switch Plate: | Single | Fastener Type: | Self-tapping Screws |
| Screw Size: | #10 x 1 in. | Screw Material: | Stainless Steel |
| Screw Thread: | 18 | Screw Amount: | 4 |
| Plate Thickness: | 0.125 (1/8) | Plate Dimensions: | 4 in. x 9.5 in. |
| Screw Size: | 1/4 in. x 1 1/2 in. | Screw Material: | Stainless Steel |
| Screw Type: | Wood | Screw Amount: | 3 |
GFCI Wire Harness Specifications |
|||
| Manufacturer: | Southwire Company | Plug Type: | 3-US 110 V Standard |
| VAC: | 125 | Hz: | 60 |
| Amps: | 15 | Watts: | 1875 |
| Type: | Rainproof Class A | GFCI Type: | In-line |
| Cable Type: | 14/5 SJTW | GFCI to Plug: | 4.5 in. |
| Cord Diameter Range: | 0.28 – 0.65 in. | Country of Origin: | Honduras |
| UL: | Listed | CSA: | Certified |
| Reset Button: | Yes | Reset Type: | Automatic |
| BH-USA SKU: | 12211 | Catalog #: | 303385214 |
|
Each BH-USA boat lift is individually crated and shipped via motor freight. It is the purchaser’s responsibility to arrange for a delivery address that is accessible to the freight company and has a fork truck available for unloading. Customers will be required to unload crates by hand if fork trucks are not available. In order to facilitate the delivery, BH-USA will request a call from the freight company to the customer. Missed deliveries may incur extra freight charges that will be the buyers’ responsibility. |
|||
Product Overview
- 102 in. travel distance
- 1,500 lb. lifting capacity
- Rotates 180 degree
- Uses belt-less A-Drive direct-drive hoists
- 3 ft. / minute travel speed
- Saltwater proficient
- Holds PWC's and skiff boats
- Everything included except bunks & bunk mounting angles
