E-Drive Hoist Hanger
The E-Drive Hoist Hanger is a dual pipe support that you mount a BH-USA E-Drive to the end of. The drive-pipe collars fit 2 3/8 in. OD (2 in. ID) drive pipes that mount directly into the gear of the e-drive. Each drive pipe sleeve has 1/4 in. grease fitting pre-installed and offset for easier greasing. The E-Drive mounts to a welded bar with (2) 0.63 in. (5/8 in.) holes. The 1/4 in. thick flat-plates have a hole lazer cut that fits 2 3/8 in. OD (2 in. ID). There are (4) 1.25 in. x 0.75 in. slots of 0.25 in. flat-plate to mount the drive pipe overhead. Made from 6061-T6 US aluminum.
Specifications
General Specifications |
|||
|---|---|---|---|
| Material: | Aluminum | Designation: | E-Drive |
| Weight: | 15.85 lbs. | Grease Fittings: | 2 |
| Length: | 28.5 in. | Grease Fitting Size: | 0.25 in. |
| Width: | 9.25 in. | Sleeves: | 2 |
| Height: | 8.5 in. | Sleeve Width: | 2.9375 in. |
| Sleeve Fits: | 2 3/8 in. OD (2 in. ID) | Sleeve Thickness: | 0.25 in. |
| Drive Mount Holes: | 2 | Drive Mount Hole Size: | 0.63 in. |
| Mounting Slots: | 4 | Mounting Slot Size: | 1.25 in. x 0.75 in. |
Product Overview
- Fits new BH-USA E-Drive
- Dual drive pipe supports with hoist hanger bar
- Made from 6061-T6 US aluminum
- Fits 2 3/8 in. OD (2 in. ID) drive pipes
- Offset grease zerks for greasing drive pipe
