Single Pipe Support for Wood Beams
The Single Pipe Support for Wood Beams is an overhead center-mounted drive pipe support. Made from 1/4 in. hot-dipped galvanized steel. Includes 1/4 in. press-in grease fitting factory installed for easy greasing. The offset grease fitting is on the drive pipe sleeve. The sleeve measures 3 in. x 2 7/8 in.
Features (3) 5/8 in. drill-punched wood beam mounting holes on each side of the angle. Accepts bolts up to 1/2 in. The angle measures 8 3/4 in. L x 2 1/8 in. W x 2 1/8 in. H. The pipe supports 2 3/8 in. OD (2 in. ID) drive pipes.
Center mount installation.
Wood beam mounting fasteners not included with the pipe support.
|Support Weight:||3.7 lbs (each)|
|Metal Thickness:||1/4 in.|
|Overall Dimensions:||11 3/8 in. x 3 1/2 in. x 2 7/8 in.|
|Angle Dimensions:||8 3/4 in. x 2 1/8 in. x 2 1/8 in.|
|Sleeve Dimensions:||3 1/2 in. x 2 7/8 in. x 2 7/8 in.|
|Wood Beam Mounting Holes:||3 (per angle)|
|Mounting Hole Size:||5/8 in.|
|Holes Accept;||Up to 1/2 in. diameter|
|Grease Fitting Amount:||1|
|Grease Fitting Style:||Press-in|
|Grease Fitting Size:||1/4 in.|
|Grease Fitting Location:||Offf-set of sleeve|
- Center mount design
- Fits 2 3/8 in. OD (2 in. ID) drive pipes
- Easy-to-reach 1/4 in. press-in grease fitting
- (3) 5/8 in. mounting hole on each flange
- Accepts up to 1/2 in. fasteners
- 1/4 in. hot-dipped galvanized steel
- Wood beam mounting fasteners not included