Dual Pillow Block Hanger Bracket

$ 149.85
UPC: 091037090850
SKU: BH09085

Only 14 left in stock


Shipping Policy


BH-USA has partnered with UPS to offer Ground, Next Day Air, 2nd Day Air, and 3 Day Select services to our customers. In order to ship with these methods, the order must meet UPS's requirements.


Your order will be shipped via the most cost-effective method possible. All shipping and handling charges are the responsibility of the customer. Additionally, they are responsible for any delivery issues that may hinder delivery. In such cases, extra fees can apply, such as residential delivery fees.

Click the button below to learn more about our ordering and shipping policies.

Our Shipping Partners shipping modal logos


Dual Pillow Block Hanger Bracket

The Dual Pillow Block Hanger Bracket mounts directly to wood beams or wooden joists. Designed for a standard pillow block to mount to the plate. The pillow block helps support the weight of the drive pipe. The ultimate support for any center mount boat lift. This pipe support will mount to virtually any overhead wood beam with adjustable brackets.

Will hold (2) 2 7/16 in. cast iron ball bearing pillow blocks, eliminating the friction that can be created when using other pipe supports with standard sleeves. Your lift will operate smoothly and quietly for years. It will give the pipe needed support on both sides of the cable, greatly reducing the chance of the unit getting into a bind. Add an optional cable winder and make lifting your boat smooth and easy.

Wood beam mounting fasteners not included.
Center mount only.


Material: Steel
Finish: Hot-dipped galvanized
Wood Beam Mounting Brackets: 2
Bracket Type: L brackets
Mounting Holes: 3 (per bracket)
Mounting Hole Size: 1/2 in.
L-Bracket Mounting Slots: 4
Mounting Slot Size: 1 1/2 in. L x 9/16 in. W
Pillow Block Mounting Holes: 4
Mounting Hole Size: 3/4 in.
Hole Location: Center of Flat Plate
Distances Between Holes: 7 1/4 in. (Center-to-Center)
Plate Edge to Mounting Hole: 1 3/16 in.

Use with BH-USA pillow block hangers, recommended for center mount only. Rating is only based on proper installation with weight on the flange as the image shown. Do not attempt to hang and put a direct load on the block. Always use the BH-USA Overhead Lift Guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.

Recommended for the center mount. Must use full-length pipe connecting two hangers. Never use a short piece of pipe. Always use the BH-USA overhead lift guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.

Product Overview

  • Center Mount Only
  • Mounts to wood beam/wood joists
  • Adjustable for different size wood beams
  • Hot-dipped galvanized steel
  • Fits (2) standard pillow blocks