Aluminum Dual Pipe Support

0 Reviews
$225.16
UPC: 091037931276
SKU: 93127

Only 13 left in stock

IN STOCK. ONLY 13 LEFT!

Shipping Policy
×

Shipping

BH-USA has partnered with UPS to offer Ground, Next Day Air, 2nd Day Air, and 3 Day Select services to our customers. In order to ship with these methods, the order must meet UPS's requirements.

Freight

Your order will be shipped via the most cost-effective method possible. All shipping and handling charges are the responsibility of the customer. Additionally, they are responsible for any delivery issues that may hinder delivery. In such cases, extra fees can apply, such as residential delivery fees.

Click the button below to learn more about our ordering and shipping policies.

Our Shipping Partners shipping modal logos

Qty.



Aluminum Dual Pipe Support for Wood Beams

The Aluminum Dual Pipe Support for Wood Beams mounts dual-drive pipe support to a center mount wood beam or joist that is running perpendicular to the watercraft. The wood beam mounting plate adjusts from 4 1/4 in. – 9 5/8  in. width. Includes (2) 5 3/4 in. x 1/2 in. slots to mount the backup plate to the pipe support. The mounting plate has (3) 5/8 in. mounting holes in a triangle mounting pattern. Made from marine-grade 6061-T6 US aluminum. Designed with oversized drive pipe sleeves that help with load distribution and reduces friction build-up. It gives support to the weight of the drive pipe in a boat lift.

19 in. between the sleeves allows BH-USA cable winders to fit. Features 1/4 in. press-in grease fitting. Installed offset on the sleeve. Allows for easier greasing of the drive pipe. Accepts mounting bolts up to 1/2 in. thick. Pipe supports 2 3/8 in. OD (2 in. ID) drive pipes.

Dual pipe supports, with or without hoist hanger, is best used in a center mount configuration. A 4,000 lb. maximum rating per hoist hanger when used correctly in center mounting. Side mounting greatly reducts the dual pipe support and hoist hanger capacity. A 1,000 lb. maximum rating when used correctly in side mounting. See the attached guide for more information and limitations.

Wood beam mounting fasteners not included.

Specifications

Support Weight: 20.8 lbs.
Center Mout Maximum Rating: 4,000 lbs.
Side Mount Maximum Rating: 1,000 lbs.
Material: Aluminum
Finish: 6061-T6 US
Metal Thickness: 1/2 in.
Overall Dimensions: 25 in. L x 9 in. W x 12 in. H
Backup Plate Dimensions: 9 in. L x 4 1/16 in. W x 6 in. H
Sleeve Dimensions: 3 in. L x 2 7/8 in. W x 2 7/8 in. H
Square Bar Dimensions: 25 in. L x 3 1/4 in. W x 2 in. H
Mounting Hole Size: 5/8 in.
Holes Accept; Up to 1/2 in. diameter
Wood Beam Mounting Holes: 2 (per backup plate)
Backup Plate Mounting Type: Slot
Backup Plate Slot Length: 5 3/4 in. L x 1/2 in. W
Distance between Sleeves: 19 in.
Slot Adjustment Size: 4 1/2 in. – 9 5/8 in.
Fastener Material: Stainless Steel
Fastener Size: 1/2 in.
Washer Type: Split Lock
Lock Washer Amount: 2
Washer Type: Flat
Flat Washer Amount: 4
Bolt Type: Hex head (full thread)
Hex Head Amount: 2
Hex Head Size: 1 1/2 in. x 1/2 in.
Grease Fitting Amount: 2 (1 each sleeve)
Grease Fitting Style: Press-in
Grease Fitting Size: 1/4 in.
Grease Fitting Location: Offf-set of sleeve

Center-mount pipe supports are only recommended for center mount or twin mount installations. It is not recommended to use pipe support on a side mount installation. Never attempt to straight-line lift any more than 4000 lbs on a side mount overhead lift or straight line more than 6000 lbs on center or twin mount lifts. Only use the full length of the pipe to connect both pipe supports. 

Do not attempt to use two short pieces of the drive pipe. If designing or engineering your overhead lift, you must download and read the BH-USA overhead boat lift guide that can be found on this page. Also available in the tech guide section. BH-USA makes available complete engineered and rated lifts and highly encourages choosing this option over designing and engineering a boat lift on your own. 

The above ratings of the dual pipe supports are only valid if installing or using the pipe supports with the BH-USA overhead boat lift guide. The Side Mount and Twin Mount ratings are based on straight line pull. Rating is based on per pipe support and not per boat lift. When considering the weight of your boat, you must use full wet weight plus the weight of the boat cradle. (wet weight + boat cradle weight = total lifting weight)

BH-USA engineers and manufactures factory-rated complete boat lifts. We highly recommend purchasing one of these boat lifts instead of building your own. If you, or your installer, buys parts and pieces to engineer your custom boat lift, it will no longer be considered a Boat Hoist USA engineered boat lift.

 

BH-USA engineers and manufactures factory-rated complete boat lifts. We highly recommend purchasing one of these boat lifts instead of building your own. If you, or your installer, buys parts and pieces to engineer your custom boat lift, it will no longer be considered a Boat Hoist USA engineered boat lift.

Product Overview

  • Center Mount Installation
  • 19 in. between sleeves
  • Each sleeve has a 1/4 in. easy-to-reach grease fitting
  • Helps hold the weight of a drive pipe
  • Fits cable winders between the sleeves
  • Made from marine-grade 6061-T6 US aluminum
  • The mounting plate has (3) 5/8 in. mounting holes in a triangle shape
  • Pipe supports 2 3/8 in. OD (2 in. ID) drive pipes
  • Wood beam fasteners not included

Reviews