Single 2 7/16 in. Pillow Block Pipe Support Kit
$ 149.95
SKU: BH09088
UPC: 091037090881
In stock
Special Order
Stock Policy
Shipping Policy
Return Policy
Single 2 7/16 in. Pillow Block Pipe Support Kit
The Single 2 7/16 in. Pillow Block Pipe Support Kit mounts directly to wood beams or wooden joists. The kit includes the single pillow block hanger bracket and 2 7/16 in. pillow blocks. Pillow block mounting fasteners included. The pillow block helps support the weight of the drive pipe. Accepts 2 3/8 in. OD (2 in. ID) drive pipes.
Single Pillow Block Hanger Bracket
Made from 1/4 in. hot-dipped galvanized steel. Feature (2) 3/4 in. pillow block mounting holes. 7 1/4 in. center-to-center on the plate. Built with (2) 1/2 in. wood beam mounting holes. Measuring 4 in. center-to-center.
2 7/16 in. Pillow Block
The 2 7/16 in. Pillow Block bearing is a pedestal used to provide support for a rotating shaft with the help of compatible bearings & various accessories. Made from cast iron housing with a chrome steel ball-bearing insert. Features (2) 3/4 in. mounting holes. Powdercoated green finish. 2 7/16 in. bearing bore. Includes 1/4 in. press-in grease fitting mounted off-center.
Wood beam mounting fasteners not included
Center mount only.
Specifications
| Dimensions: | 9 1/2 in. L x 3 in. W x 12 5/16 in. H |
| Weight: | 8.85 lbs. |
| Material: | Steel |
| Finish: | Hot-dipped Galvanized |
| Wood Beam Mounting Holes: | 2 |
| Mounting Hole Size: | 1/2 in. |
| Hole Location: | Center of Flat Plate |
| Distance Between Holes: | 4 in. (Center-to-Center) |
| Plate Edge to Mounting Hole: | 1 1/2 in. |
| Hole to Block Plate Distance: | 6 1/4 in. |
| Pillow Block Mounting Holes: | 2 |
| Mounting Hole Size: | 3/4 in. |
| Hole Location: | Center of Flat Plate |
| Distances Between Holes: | 7 1/4 in. (Center-to-Center) |
| Plate Edge to Mounting Hole: | 1 3/16 in. |
| Fits Drive Pipes: | 2 3/8 in. OD (2 in. ID) |
| Pillow Block Bore Diameter: | 2 7/16 in. |
| Bearing Insert Type: | Ball |
| Locking Type: | Set Screw |
| Housing Material: | Cast Iron |
| Bearing Insert Material: | Chrome Steel |
| Number of Bolts: | 2 |
| Bolt Size: | 3/4 in. |
| Bolt Hole Center to Center: | 7.25 in. |
| Mounting Surface to Shaft Center: | 3 in. |
| Overall Height: | 5.50 in. |
| Overall Width: | 2.62 in. |
| Overall Length: | 9.50 in. |
| Dynamic Load Capacity: | 12,927 lbs. |
| Static Load Capacity: | 8992 lbs. |
| Finish: | Painted |
| Standards: | ISO |
Use with BH-USA pillow block hangers, recommended for center mount only. Rating is only based on proper installation with weight on the flange as the image shown. Do not attempt to hang and put a direct load on the block. Always use the BH-USA Overhead Lift Guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.
Product Overview
- Center Mount Only
- Wood beam/wood joist mounting bracket
- Hot-dipped galvanized steel
- 2 7/16 in. pillow block installs onto the block hanger bracket
- Pillow block fasteners included
- Accepts 2 3/8 in. OD (2 in. ID) drive pipes
- Wood beam mounting fasteners not included
