Elite 3/4 HP Painted C-Face Electric Motor
$ 306.50
UPC: 814461000024
SKU: 93050
In stock
BH-USA Return Policy
Elite 3/4 HP Painted C-Face Electric Motor
The Elite 3/4 HP Painted C-Face Electric Motor is a single-phase, dual voltage motor. Painted black finish. Includes start capacitor. Direct drive mounting pattern. Compatible with our A-Drive direct drive boat hoists. Compatible with BH-USA A-Drive Direct Drive Systems, Golden Sea Drives, and other direct-drive systems. Aluminum end bells included. Double shielded ball bearings. Dynamically balanced rotor. NEMA 56C enclosure with IP-55 protection. UL/CSA listed and approved. TENV (totally enclosed, non-ventilating) housing. The TENV housing keeps dirt, insects, and water out. Max runtime is 15 minutes. Finished in black. Includes colored T-wires. Comes with easy-to-follow instructions. Includes BH-USA’s equipment guide and wiring instructions.
Elite Painted C-Face electric motors are TENV (totally enclosed, non-ventilated). There is no IP rating on the electric motors. It is not recommended to use painted C-face motors in saltwater environments. A covered or enclosed area, such as a boathouse, must be used. It is not recommended to place the painted C-face motor in an environment where it will be directly exposed to the elements. Stainless steel Elite C-face motors are recommended for direct exposure or saltwater environments.
When wiring or rewiring electrical components, BH-USA recommends hiring a licensed electrician.
Specifications
General Specifications |
|||
|---|---|---|---|
| Weight: | 25.05 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.75 in. | Product Width: | 6.75 in. |
| Product Height: | 8.25 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93007 | Retail SKU: | 93050 |
Nameplate Specifications |
|||
| HP: | 0.75 (3/4) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 11.0 (115v) / 5.5 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.25 |
| SFA: | 12.5 (115v) / 6.2 (230v) | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | L |
| Insulation: | B | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | cRUus |
Technical Specifications |
|||
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 8.50 in. | Mounting: | Resilient Base – Extended Studs |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Rolled Steel | Replacement Capacitor: | 465 uF |
| Capacitor SKU #: | BH02247 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.25 in. |
Product Overview
- C-Face mounting design
- NEMA 56C electric motor
- UL Listed & CSA approved
- TENV - totally enclosed, non-venting
- Standard duty, dual voltage
- Single-phase motor with a start capacitor
- Powder-coated black from the factory
- 15 min. maximum run time
Reviews
Related Products
You may also like...
-
6,500 lb. Deluxe Gear Plate Assembly
$546.95 – $599.63 Select options -
A-Drive 40:75 Drive Shaft Kit
$86.75 – $99.99 Select options -
2 in. Aluminum Single Belt Motor Pulley
$14.20 – $15.99 Select options
