Gulf Breeze Single Pipe Support
Gulf Breeze Single Pipe Support
The Gulf Breeze Single Pipe Support helps support the weight on the drive pipe and hoist. It allows boat lifting using structural beams running with the slip, not across the slip. Designed to mount on wood beams. Preferred installation when Joists are running from back to the front of the slip. Not recommended load bearing without second support, but can be used as extra support in the center for longer runs.
Features all 6061-T6 US aluminum parts and all stainless steel fasteners. No welds. Fully adjustable. Side mount designed boat lift. Includes an aluminum bearing block with a bronze flange bearing to support the drive pipe. It has a 1/4 in. screw-in grease fitting to lubricate the drive pipe. Lightweight, easy to work with, and easy to customize per installation.
Accepts 1.5 in. drive pipe.
The Gulf Breeze boat lifts are designed to fit particular construction methods typically found around the Florida Panhandle Gulf Breeze and Mobile Bay areas.
Specifications
| Fits Drive Pipe Size: | 1.5 in. |
| Straight Pull Lift Capacity: | 1,500 lbs. |
| Compounded Pull Lift Capacity: | 3,000 lbs. |
| Material: | Aluminum |
| Material Type: | 6061 T-6 us |
| Material Thickness: | 1/4 in. |
| Dimensions: | 3 1/4 in. L x 11 1/2 in. W x 20 1/2 in. H |
| Wood Joist Mounting Holes: | 4 (per flange) |
| Mounting Hole Size: | 3/4 in. |
| Max. Stinger Width: | 5 1/2 in. |
| Bearing Block Dimension: | 4 7/8 in. x 5 3/4 in. x 1 1/2 in. |
| Housing Material: | 6061-T6 US Aluminum |
| Press In Bushing Type: | Bronze |
| Bushing ID: | 1 7/8 in. |
| Bearing Surface | 1 5/8 in. |
| Mounting Hole | 9/16 in. |
| Grease Fitting Size: | 1/4 in. |
| Fastener Type: | Hex head bolts |
| Fastener Material: | Stainless steel |
| Fastener Size: | 1/2 in. x 5 1/2 in. |
| Hex Head Bolts Included: | 2 |
| Fastener Type: | Nut |
| Fastener Material: | Stainless steel |
| Fastener Size: | 1/2 in. |
| Nuts Included: | 2 |
| Fastener Type: | Lock washer |
| Fastener Material: | Stainless steel |
| Fastener Size: | 1/2 in. |
| Lock Washers Included: | 2 |
Do not attempt to use with two short pieces of pipe. Always use the BH-USA overhead lift guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.
Product Overview
- 6061-T6 US aluminum construction
- Lightweight, no welds, and easy to install
- Adjustable with different wood joist sizes
- Designed with using structural beams that run with the slip
- Accepts 1.5 in. drive pipe
