Single Pillow Block Hanger Bracket

0 Reviews
$40.00
UPC: 013964212488
SKU: 70278

In stock

IN STOCK

Shipping Policy
×

Shipping

BH-USA has partnered with UPS to offer Ground, Next Day Air, 2nd Day Air, and 3 Day Select services to our customers. In order to ship with these methods, the order must meet UPS's requirements.

Freight

Your order will be shipped via the most cost-effective method possible. All shipping and handling charges are the responsibility of the customer. Additionally, they are responsible for any delivery issues that may hinder delivery. In such cases, extra fees can apply, such as residential delivery fees.

Click the button below to learn more about our ordering and shipping policies.

Our Shipping Partners shipping modal logos

Qty.



Single Pillow Block Hanger Bracket

The Single Pillow Block Hanger Bracket mounts directly to wood beams or wooden joists. Designed for a standard pillow block to mount to the plate. The pillow block helps support the weight of the drive pipe. Made from 1/4 in. hot-dipped galvanized steel. Feature (2) 3/4 in. pillow block mounting holes. 7 1/4 in. center-to-center on the plate. Built with (2) 1/2 in. wood beam mounting holes. Measuring 4 in. center-to-center.

Wood beam mounting fasteners not included.
Center mount only.

Specifications

Dimensions: 9 1/2 in. L x 3 in. W x 12 5/16 in. H
Weight: 8.85 lbs.
Material: Steel
Finish: Hot-dipped Galvanized
Wood Beam Mounting Holes: 2
Mounting Hole Size: 1/2 in.
Hole Location: Center of Flat Plate
Distance Between Holes: 4 in. (Center-to-Center)
Plate Edge to Mounting Hole: 1 1/2 in.
Hole to Block Plate Distance: 6 1/4 in.
Pillow Block Mounting Holes: 2
Mounting Hole Size: 3/4 in.
Hole Location: Center of Flat Plate
Distances Between Holes: 7 1/4 in. (Center-to-Center)
Plate Edge to Mounting Hole: 1 3/16 in.

Use with BH-USA pillow block hangers, recommended for center mount only. Rating is only based on proper installation with weight on the flange as the image shown. Do not attempt to hang and put a direct load on the block. Always use the BH-USA Overhead Lift Guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.

Recommended for the center mount. Must use full-length pipe connecting two hangers. Never use a short piece of pipe. Always use the BH-USA overhead lift guide when designing your overhead lift. BH-USA does not recommend overhead lifts for boats weighing more than 12,000 lbs.

Product Overview

  • Center Mount Only
  • Wood beam/wood joist mounting bracket
  • Hot-dipped galvanized steel
  • (2) 1/2 in. wood beam mounting holes
  • (2) 3/4 in. pillow block mounting holes
  • Mounting fasteners not included

Reviews