The Max Overhead V-Hull Boat Lift
$12,501.39 - $12,818.07
Make Your Selection:
Special Order
Stock Policy
Shipping Policy
Return Policy
The Max Overhead V-Hull Boat Lift
The Max Overhead V-Hull Boat Lift has a maximum lifting capacity of 12,000 lbs. It uses a 1.5 HP, 220V motor and an A-Drive hoist system. Each hoist is rated to lift 7,000 lbs. The lift includes an in-line GFCI. The gearbox has a 40:90 size ratio.
The top beam assembly includes two 14-foot overhead I-beams made from Galvanized steel. Each beam is 3.5 inches wide and weighs 12.5 lbs. per foot. The lift also includes a 13.5-foot galvanized drive pipe with a 2.375-inch diameter.
The cradle is available in 9-foot or 10-foot lengths. It is made from hot-dipped galvanized steel and includes welded endplates. Each endplate is rated to support up to 6,000 lbs. Wooden cradle bunk beams are not included.
The cable system includes galvanized steel cables, galvanized blocks, and galvanized sheaves. The guideposts are made from PVC and include bumper sets.
Each boat lift is packaged and shipped individually by motor freight. The delivery location must be accessible to a freight truck, and unloading equipment, such as a forklift, must be available. BH-USA coordinates delivery with the freight carrier. Additional charges may apply if a scheduled delivery cannot be completed.
Specifications
General Specifications |
|||
|---|---|---|---|
| Lift Capacity: | 12,000 lbs. | Hoist Type: | A-Drive (Direct-Drive) |
| Motor Size: | 1.5 HP | Hoist Capacity: | 7,000 lbs. / Hoist |
| Lift Speed: | 2 ft. / Min. | Gearbox Size: | 40:90 (High Efficiency) |
| Speed Test: | 24 in. / 58 sec. | Gearbox Type: | Double Worm Reducer |
| GFCI: | 220v In-line | Switch Type: | Rotary Cam |
Top Beam Specifications |
|||
| Beam Type: | Overhead | Beam Amount: | 2 |
| Beam Length: | 14 ft. | Beam Type: | I-Beam |
| Beam Width: | 3.5 in. | Beam Configuration: | Structural |
| Beam Height: | 6 in. | Weight / Ft: | 12.5 lbs. |
| Beam Construction: | Steel | Beam Finish: | Hot-dipped galvanized |
Drive Pipe Specifications |
|||
| Drive Pipe Length: | 13.5 ft. | Drive Pipe Type: | Sch. 40 |
| Drive Pipe Width: | 2.375 in. | Finish: | Galvanized |
Cradle Specifications |
|||
| Cradle Beam Length: | 9 ft. or 10 ft. | Endplate Length: | 10 in. |
| Cradle Beam Width: | 3.375 in. | Endplate Width: | 0.4125 in. |
| Cradle Beam Height: | 6 in. | Endplate Height: | 3.25 in. |
| Material: | Steel | Endplate Attachment: | Welded |
| Finish: | Hot-dipped galvanized | Mounting Holes: | 2 |
| Weight / Foot: | 12.5 lbs. | Mounting Hole Placement: | Center of Endplate |
| Weight Rating: | 6,000 lbs. (Distributed) | Mounting Hole Size: | 0.625 in. |
| Chock Angle Size: | 16 in. | Design: | Steel Beams |
| Finish: | Hot-dipped galvanized | Fits: | 5 in. Web |
| Angle Weight: | 3.85 lbs. | Bracket Size: | 16 in. x 2 in. |
| Chock Angle Size: | 16 in. | Bracket Amount: | 8 |
| Cradle Beam Type: | Steel | Cradle Beam Finish: | Hot-dipped galvanized |
| Cradle Beam Size: | 5 in. Web | Weight: | 3.85 lbs. |
| Ace Labs #: | 834 | Bracket Size: | 16 in. x 2 in. (per flange) |
| Mounting Hole Size: | 9/16 in. | Hole Spacing: | 1 1/2 in. (center-to-center) |
| Bolt Type: | Carriage | Bolt Amount: | 16 |
| Bolt Size: | 1/2 in. x 3 in. | Bolt Finish: | Galvanized |
| Bolt Type: | Hex Hed | Bolt Amount: | 8 |
| Bolt Size: | 1/2 in. x 4 1/2 in. | Bolt Finish: | Galvanized |
| Washer Type: | Flat | Washer Amount: | 16 |
| Washer Size: | 1/2 in. | Washer Finish: | Galvanized |
| Washer Type: | Lock | Washer Amount: | 8 |
| Washer Size: | 1/2 in. | Washer Finish: | Galvanized |
| Nut Type: | Regular | Nut Amount: | 24 |
| Nut Size: | 1/2 in. | Nut Finish: | Galvanized |
| Stanction Material: | Steel | Stanction Amount: | 4 |
| Stanchion Size: | 2 ft x 2 in. (Dia.) | Back-Up Plate Size: | 10 in. x 2 in. (each flange) |
| Mounting Bolt Size: | 1/2 in. | Accepts: | 2 in. ID PVC pipe to slide over |
| Fits Flange Size: | 6 in. H | Close Hole Spacing: | 1.5 in. |
| Wide Hole Spacing: | 6 3/8 in. | Stanction Finish: | Hot-dipped galvanized |
| Guidepost Material: | PVC | Guidepost Compound: | PVC 1120 Type 1 Sch. 40 |
| Rating: | ASTM D 2665 | PSI: | @ 23° C |
| Thickness: | 0.1875 | Pipe Width (OD): | 2.375 in. |
| Color: | White | Pipe Width (ID): | 2 in. |
| Top Cap Mod: | Drilled | Hole Size: | 0.25 in. |
| Guidepost Amount: | 4 | Guidepost Bumper Amount: | 4 |
| Guidepost Bumper Color: | Black | Guidepost Bumper Length: | 36 in. |
| Guidepost Bumper Type: | Solid | Cover Type: | Nylon |
| Cover Enclosement: | Velcro | Fits: | 2 in. Guideposts |
Cable & Attachment Specifications |
|||
| Block Size: | 4 in. / 3 Ton | Stamp Rating: | 6,000 lbs. |
| Dimensions: | 7 3/4 in. x 5 in. x 3 1/4 in. | Weight: | 6.1 lbs. |
| Material: | Steel | Amount: | 4 |
| Finish: | Galvanized | Sheave Size: | 4 in. x 3/4 in. |
| Sheave Bore: | 1/2 in. | Sheave Cable Groove: | 1/2 in. |
| Shackle Dimensions: | 3 in. x 3 in. x 5/8 in. | Safety Pin Holes: | 2 |
| Safety Pin Hole Size: | 1/2 in. | Safety Pin Quick Release Size: | 3 1/4 in. x 1/2 in. (Fully Extended) |
| Yarding Block Dimensions: | 6 1/2 in. x 5 in. x 3 1/4 in. | Housing Holds: | 4 in. Sheave |
| Grease Fitting Size: | 1/4 in. (Cast Protected) | Housing Bottom Bolt: | 1 3/4 in. x 1/4 in. (Cast Protected) |
| Cable Winder: | Single Directional | Fits: | 2 3/8 in. OD (2 in. ID) Drive Pipe |
| Cable Diameter: | 0.313 in. | Cable Length: | 50 ft. Sections |
| Cable Type: | 7 x 19 Aircraft | Cable Amount: | 4 |
| Cable Configuration: | 2 part | Cable Material: | Stainless Steel |
Motor Specifications |
|||
| Weight: | 37.35 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 11.75 in. | Product Width: | 6.50 in. |
| Product Height: | 8.75 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93049 | Retail SKU: | 93100 |
| Electrical Type: | Capcitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 10.0 in. | Mounting: | Round |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Stainless Steel | Replacement Capacitor: | 800 uF |
| Capacitor SKU #: | BH02246 | Keystock: | Included |
| Keystock Length: | 1 in. | Keystock Width: | 0.75 in. |
| HP: | 1.5 | Voltage: | 220v |
| Phase: | 1 | Amps: | 7.7 |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56c | Service Factor: | 1.15 |
| SFA: | 8.8 | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | E |
| Insulation: | F | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
Rotary Cam Specifications |
|||
| Model #: | CA0200037I-B96IQ6R | Retail SKU #: | BH09015 |
| Weight: | 1.25 lbs. | Box Color: | Light Grey |
| Housing Length: | 4.5 in. | Housing Width: | 3.5 in. |
| Housing Height: | 4.5 in. | Handle Color: | Red |
| Handle Length: | 3.0 in. | Handle Width: | 1.1875 in. |
| Handle Height: | 1.3125 in. | Country of Origin: | Italy |
| Amps: | 20 | VAC | 600 |
| Torque: | Tight | Certification: | EN 60947-3 |
| Certification: | CE | Certification: | C-UL-US Listed |
GFCI Specifications |
|||
| Manufacturer: | Southwire Company | Plug Type: | US 240 Volt NEMA 6-15 |
| VAC: | 240 | Hz: | 50/60 |
| Amps: | 15 | Watts: | 3600 |
| Type: | Rainproof Class A | GFCI Type: | In-line |
| Cable Type: | 14/5 SJTW | GFCI to Plug: | 4.5 in. |
| Cord Diameter Range: | 0.28 – 0.65 in. | Country of Origin: | Honduras |
| UL: | Listed | CSA: | Certified |
| Reset Button: | Yes | Reset Type: | Automatic |
| BH-USA SKU: | 12228 | Catalog #: | 25090 |
Gearbox Specifications |
|||
| Gearbox Type: | Double Worm Reduction | Overall Dimensions: | 12.42 in. x 7.56 in. x 14.57 in. |
| Gear Type: | 40:90 | Actual Ratio: | 450:1 |
| Output Shaft: | 1.25 in. | Input Motor Shaft: | 0.625 in. |
| Motor Shaft to Pipe Shaft: | 7.26 in. | Box Type: | Fully Enclosed |
| Pipe Mount Bolt Size: | 0.55 in. | Pipe Mount Bolt Amount: | 4 |
| Pipe Flange Size: | 9.37 in. x 7.58 in. x 8.11 in. | Motor Mount Type: | NEMA 56C |
| Motor Mount Bolt Size: | 0.44 in. | Motor Mount Bolt Amount: | 4 |
| Motor Mount Hole-to-Bolt Mount: | 4.15 in. | Pipe Bolt Mount Hole-to-Bolt: | 4.59 in. |
| 1 1/2 HP Output Torque: | 7.399 in./lbs. | Case Material: | Cast aluminum |
| Lube Type: | Specialty-blended grease | Lube: | Maintenance-free |
|
Each BH-USA boat lift is individually crated and shipped via motor freight. It is the purchaser’s responsibility to arrange for a delivery address that is accessible to the freight company and has a fork truck available for unloading. Customers will be required to unload crates by hand if fork trucks are not available. In order to facilitate the delivery, BH-USA will request a call from the freight company to the customer. Missed deliveries may incur extra freight charges that will be the buyers’ responsibility. |
|||
Product Overview
- Heavy-duty commercial boat lift
- 12,000 lbs lifting capacity
- Easy installation and maintenance
- Optional bottom plate available
- Reliable and long-lasting
- Suitable for V-hull vessels
- Safety features included
- Comprehensive instructions included
- Virtually maintenance-free
- Ideal for marina slips
- Weather-protected steel enclosure
- Robust 1.5 HP motor power
- Quick lift speed: 2 ft/min
- Cable and block savers for safety
Product Guides
You may also like…
-
The Max Overhead Boat Sling Lift
Price range: $11,673.25 through $12,001.38 Select options This product has multiple variants. The options may be chosen on the product page -
The Max Overhead Boat Sling Lift w/o Overhead Beams
Price range: $9,008.44 through $9,410.93 Select options This product has multiple variants. The options may be chosen on the product page -
Gulf Breeze Overhead Boat Lift
$10,591.75 Add to cart -
The Max Overhead V-Hull Boat Lift w/o Overhead Beams
Price range: $6,319.57 through $6,557.44 Select options This product has multiple variants. The options may be chosen on the product page
