8,000 lb. Aluminum Four Post Pile Mount Lift

0 Reviews
$7,652.06
UPC: 091037848741
SKU: 84874

AVAILABLE

Qty.



8,000 lb. Aluminum Four Post Pile Mount Lift

The 8,000 lb. Aluminum Four Post Pile Mount Lift is designed to mount on the tops of four dock pilings. The lift uses a 15 ft. cable straight-line configuration. This results in an 8,000 lb. lift capacity rating. Features no-weld design. Made of 6061-T6 US aluminum. The lift uses A-Drive direct drive hoists.

Bracket long bolts for pilings not included.

Lifting Capacity Gear Ratio Motor Horsepower Motor Finish Piling Amount Cable Configuration Cable Thickness Cable Length
6,000 lbs. 40:75 3/4 HP Stainless steel 4 Straight-Line 5/16 in. 15 ft.
8,000 lbs. 40:75 1 HP Stainless steel 4 Straight-Line 5/16 in. 15 ft.
9,000 lbs. 40:75 1 HP Stainless steel 4 Compounded 5/16 in. 33 ft.
12,000 lbs. 40:90 1 HP Stainless steel 4 Compounded  5/16 in. 33 ft.
16,000 lbs. 40:90 1 HP Stainless steel 4 Compounded 5/16 in. 33 ft.
20,000 lbs. 40:90 1 1/2 HP Stainless steel 4 Compounded 5/16 in. 33 ft.
20,000 lbs. 40:90 1 1/2 HP Stainless steel 6 Compounded 5/16 in. 33 ft.
24,000 lbs. 40:90 1 1/2 HP Stainless steel 6 Compounded 3/8 in. 33 ft.
30,000 lbs. 40:90 1 1/2 HP Stainless steel 8 Compounded 3/8 in. 36 ft.
All aluminum pile mount boat lifts include a BH-USA A-Drive direct-drive hoist and a c-face input wired boat lift motor.
Specifications

Hoist Type: Direct-Drive Hoist
Lifting Capacity: 8,000 lbs.
Cable Type: 7 x 19 aircraft
Cable Material: Stainless steel
Cable Length: 15 ft.
Cable Configuration: Straight-line
Minimum Piling Size: 8 in. (dia.)
Electrical: UL, NEMA, GFCI protected
UL File: E464499
Limit Switch Bracket: Included (limit switch optional)
Lifting Capacity: 4,000 lbs / Beam
Top Beam Dimensions: 12 ft. 6 in. L x 2 1/2 in. W x 6 in. H
Top Beam Type: Channel
Top Beam Material: 6061-T6 US Aluminum
Drive Pipe Finish: Hot-Dipped Galvanized
Drive Pipe Type: Sch. 40
Beam Weight: 2.834 lbs. / ft.
Pipe Bearings: 4 / Beam
Pipe Bearings Material: Bronze
Bearing Maintenance Grease Fittings
Grease Fitting Size: 1/4 in.
Cable Winders: 2
Cable Winder Style: Side-Mounted (Boat Lift Style)
Cable Winder Type: Single Direction
Cable Winder Fits: 1.5 in. ID Drive Pipe
Drive Pipe Dimensions: 12 ft. 4.5 in. L (1,5 in. ID)
Fasteners Stainless Steel
Cradle Beam Material: Aluminum
Type: 6061-T6 US
Style: Marine-grade extruded
Beam Type: Structural
Web Size (A): 6 in.
Flange Size (B): 4 in.
Web Thickness (C): .210 in.
Flange Thickness: .350 in.
Beam Wt./Lin Ft.: 4.7 lbs. (per ft.)
Sheave Housing Dimensions: 6 in. web x 4 in. flange
Accepts: 4 in. aluminum sheave
Material: Aluminum
Sheave Bolt Bore: 3/4 in.
Fasteners Material: 316 stainless steel
Cradle Bunk Material: Aluminum
Bunk Material Style: : 6061-T6 US
Bunk Type: Cradle
Length: Varies
Padding Material: Rubber
Padding Design: Non-marking
Padding Color: Black
Bunk Height: 8 in.
Bunk Angle: 19 degrees
8 in. Cradle Bunk Weight: 2.898 lbs. / linear ft.
Gearbox Type: Double worm reduction (fully enclosed)
Gearbox Weight: 28.35 lbs.
Gear Type: 40:75 configuration
Actual Ratio: 450:1
Case Material: Cast Aluminum
Lubrication: Specially blended gear grease
Lubrication Application: Maintenance-free
Motor Flange to Driveshaft Flange Offset: 1.22 in.
Overall Dimensions: 11.16 in. L x 7.21 in. W x 13.23 in. H
Output Shaft Size: 1 1/4 in.
Input Motor Shaft Size: 5/8 in.
Motor Shaft to Drive Pipe Shaft: 6.59 in.
Drive Pipe Mounting Bolt Size: (4) 1/2 in.
Drive Pipe Bolt Mount Hole to Bolt Mount Hole: 4.59 in.
Drive Pipe Gearbox Dimensions: 8.07 in. L x 5.04 in. W x 6.77 H
Motor Mounting Type: NEMA 56C
Motor Mounting Bolt Size: (4) 3/8 in.
Motor Bolt Mount Hole to Bolt Mount Hole: 4.15 in.
Motor Gearbox Dimensions: 4.78 L x 3.94 in. W x 3.37 in. H
3/4 HP Motor A-Drive Output Torque: 3,699 in./lbs.
1 HP Motor A-Drive Output Torque: 4,932 in./lbs.
Max Run Time: 15 Minutes
Dimensions: 9 in. x 10 1/2 in. x 6 1/4 in.
Horsepower: 1 HP
Mounting Type: C
RPM: 1725
Service Factor: 1.15
Voltage: Dual (115v/230v)
Phase: 1
Amps: 15.6
SFA: 17.5
Herz: 60
AMB: 40°C
Frame: 56C
HSG: TENV
Code: H
Insulation: F
Shaft Diameter 5/8 in.

Each BH-USA boat lift is individually crated and shipped via motor freight. It is the purchaser’s responsibility to arrange for a delivery address that is accessible to the freight company and has a fork truck available for unloading. Customers will be required to unload crates by hand if fork trucks are not available. In order to facilitate the delivery, BH-USA will request a call from the freight company to the customer. Missed deliveries may incur extra freight charges that will be the buyers’ responsibility.

Product Overview

  • 8,000 lb. straight-line cable lifting capacity
  • Mounts to 4 pilings
  • 6061-T6 US aluminum top beams
  • Features maintained drum switches
  • Features 110v motors
  • In-line GFCI control cable
  • Complete lift ships freight in a crate
  • Includes direct-drive hoist

Reviews